1. You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.


Click on the photo to start tagging. Done Tagging

In This Album

IC7000 with N2VZ Turbo Tuner External Cooling fan mounted over rear heat sink fins. This the the "MB-62" remote mounting bracket. I cut the end off of a cell-phone charger that had really good spring-loaded friction expanders and filled it with epoxy and then attached it to the bracket with a screw. I then taped two pieces of aquarium tu Icom 7000 with TFT 7 inch color monitor mounted above. DSCI0007 7000 with 7 inch monitor I took an old cell phone charger and cut the 12v cigarette adapter off of it. The center conductor "+" was removed and the inside was filled with epoxy. The spring loaded side conductors had really good external pressure on them to maintain good tension w IC7000 with 7 inch TFT color monitor DSCI0009 Tarheel 200A-HP Mount attached to the control head. side profile view DSCI0011 Tarheel 200A-HP with Cap-Hat. Icom 7000 installed under Drivers seat. Closeup of Anderson power pole distribution block.

Share This Page