1. You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Firewood and target backers for Cuddeback 2013

Click on the photo to start tagging. Done Tagging

In This Album

The rack assembly I fabricated for the 40-watt panel (x2).

Racks were fabricated using left over scrap materials. Bases are fiberglass UniStrut, cross member is shallow steel Unistrut. Hinges made from aluminum ''U' channel and struts from some 'L' ang Here's the little '83 XT-200 I picked up in the summer of 2012. I really miss my old '72 250 DT1, but I decided to go 4-stroke this time. Tokyo Hi-Power HT-750. 6m/15/40m cw/ssb HT. Cool little radio with an extremely hot receiver. My main hobby My garage station from a few years ago. Now running a TS-2000 and receive on an IC-R7000 when duplexing Making a new solar 'collector' from a discarded 'doggy door' insert (from a sliding glass door cut down to 54"x15"). The box is constructed from 2 x 4s and 3/8" plywood (painted black). Testing the new solar collector. The temperature inside the box rose to over 200F degrees in less than 30 minutes ... better than I thought it would produce. Firewood and target backers for Cuddeback 2013 Two target backers so far (30" x 34") for Cuddeback 2013 Bike rack assembled and mounted on the Tacoma Cuddeback 2013:
My Flintstone's Bike (version 1.1)
I hope somebody took pix of version 1.2, but I heard that Saturday night's campfire cooked it. Cuddeback 2013: Cuddeback 2013:
Camping amenities. Next year, bringing a fuckin' porta-potty! hamcom Close-up of the new solar collector. It works better than the solar pool collector used in the first experiment, but still not hot enough. I'll try copper tubing next time. First test of the solar water heater with the new design collector. I used 40 feet of 1/2" ID black vinyl pond hose coiled inside.

Share This Page