• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by BBI

  1. BBI

    Question on the ANYTONE 6666

    I had already put a 6-pin plug on my Turner, wired for a Magnum 1. I plugged it in to the AT-6666 and it was correct. Crank the gain at the mic, turn the mic gain in the radio down. Works great.
  2. BBI

    Battery for AnyTone 398UV

    It's not a clone. It's a TERMN-8R battery from AnyToneTech. The 398UV is an uncommon radio in the US, but is basically a TERMN-8R.
  3. BBI

    Battery for AnyTone 398UV

    I don't know why I started this in the FRS category! But the good news is that the 398UV is almost exactly a TERMN-8R. I bought a TERMN-8R battery, and it's the same.
  4. BBI

    Question on the ANYTONE 6666

    I'm running an old Turner Super Sidekick on my 6666, and it sounds phenomenal. I didn't remove a part or do any mods.
  5. BBI

    GMRS or CB

    There are GMRS repeaters and you're allowed 50w in a mobile or base.
  6. BBI

    Battery for AnyTone 398UV

    I just scored a killer deal on an AnyTone 398UV hand-held. I have not been able to find a spare QB-35L battery. Anybody know of a source with some in stock? I have a feeling they are a China shortage, and won't be back in stock for quite some time.
  7. BBI

    Anytone AT-5555 or AT-6666

    My 6666 runs circles around the Magnum 1 it replaced in all aspects. My meters show strong forward swing on AM, and the group I always talk to says it sounds much better.
  8. BBI

    My new 8 element 2 meter quad.

    You're about ready for moon bounce!
  9. BBI

    mean well power supply

    My Meanwell is plugged into a power strip on my desk that I turn on & off.
  10. BBI

    Magnum

    I should have got the AT-6666. It would be my fourth AnyTone radio; 3 have worked flawlessly for years. I was seduced by the Magnum 1's wild look and glowing beauty, which has now gone! My Magnum 1 has lived a life of luxury as a base station since new. No good reason for the backlight to fail...
  11. BBI

    Magnum

    I just noticed the backlight on my Magnum 1 has gone belly-up.
  12. BBI

    Magnum

    Mine is still working just fine after 3 years. Not a single issue.
  13. BBI

    Soldering iron suggestions?

    Yes. I have tips everywhere from tiny SMT use all the way up to big spades that easily do coax connectors.
  14. BBI

    Soldering iron suggestions?

    No shwag, though! I find it strange how many hams have never even heard of Hakko, Metcal, or JBC.
  15. BBI

    Soldering iron suggestions?

    I got around $1200 worth of stuff if it was new. Most of the included tip selection was unopened from the package. Everything else had barely been used at all. $350, an uncommon eBay gamble that I actually won!