You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
If I set the mount so that the base of the antenna is level with the edge of the roof of the cap and use a center load (like the Wilson 2000) then the load will be above the ladders. Would that be sufficient?
I carry ladders on the rack and need to access from both sides so attaching to the side of the rack would not work. My thought is a body mount like this one
attached to the front of the cap in the center with antenna mounted to it. The antenna would stick up between the ladders.
Contractor cap is a bed topper cap that has tool boxes on both sides and a ladder rack on the roof. I cannot put a mag mount on the cap - won't stick to aluminum. Current antenna has the base load above the roof of the cab but not above the top of the cap - Lil Wil is not on the truck in the...
Good evening, all. I have installed an ARE aluminum contractor cap that is 36" tall on my pickup truck, attached with four self-drilling self-tapping bolts into the top edge of the bed. There is a non-conductive seal between the cap and the bed. Is there enough contact between the cap and the...
Ran across a driver who was always hollered at on channel 19 and asked who he was. He would reply with his handle at the time and was told "Oh, I thought you were someone else". New handle became SOMEONE ELSE
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.