You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
955 v2 have the same issue since they use the same exact board, Somewhere along the production run they made the receiver Way Too Hot "overly sensitive" or the Smeter calibration is out of whack or something, A local of mine who when I listen on my Kenwood 480 and a SPT500 gives me S9 suddenly...
no deoxit went into the clarifier, i used it on the back side of board and vr controls however. As it stands now the clarifier has no effect on anything making ssb useless because everyone sounds garbled.
Yes i am positive, been in radio 35 years, the clarifier knob on this thing does not adjust the rx frequency at all, its like it is a knob hooked to nothing, it does not vary the rx at all.
I have a trc 453, radio is totally stock, it's a garage find, deoxit on all controls and board, radio transmits and receives, has good modulation and on frequency on ssb when listening from another receiver, however.... I can not tune anyone in with the clarifier, it does absolutely nothing as...
thanks for your response, yes i tried doing that with the PA,, same problem. other than the ultra low rx volume the radio works as it should great modulation on transmit. Just ultra low volume, i have use it but need to crank the volume to hear people, their signals are normal.
I have a rci 2995 dx, not the dxcf but the dx model, It works great except all of a sudden the volume is very low on rx, both am and ssb i have to crank the volume all the way to hear people now. What is the problem with this, does the same with headphones, i have to crank the volume knob...
Can someone tell me if this radio can be channeled ? sears roadtalker 40, it has am/usb/lsb, its a mobil, model is 934-38260702
thanks for any information.
how would i get a uniden 76xl cb/pa jack wires to work, i bought this 76xl and someone disconnected the cb/pa switch i have 5 wires orange/purple/black white and pink, need help, its a nice radio but because these wires are not connected it wont tx/rx
how would i get a uniden 76xl cb/pa jack wires to work, i bought this 76xl and someone disconnected the cb/pa switch i have 5 wires orange/purple/black white and pink, need help, its a nice radio but because these wires are not connected it wont tx/rx
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.