• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by fernan_01

  1. F

    Looking for RCI 69 Plus frequency Conversion

    Looking for Frequency conversion on RCI 69 plus radio, been looking around and can’t find the mod anywhere. Thanks in Advance 73’s
  2. F

    Anytone Ares 2

    AM is under modulated, needs adjustment, SSB ALC needs to be adjusted, FM deviation … At least on my radio is like you have to scream at it. I’ve seen a few videos where the radio needs adjustments on AM and FM..
  3. F

    Anytone Ares 2

    Not by software, Some people who knows how to do it, but can’t share how to do it yet confirmed that to enter the engineering menu is by a combination of Mic buttons, ptt and the switches on the radio have a certain position… I’m just waiting to see if someone posts how to do it… The radio...
  4. F

    Anytone Ares 2

    Yup, I received my radio Saturday, the radio looks good for what it is, but there are definitely some settings I would really like to change on FM and SSB and the only way to do that is by getting into the service menu. I’m going to keep on looking around and see what I can find. 73’s
  5. F

    Anytone Ares 2

    How do you get to the engineering menu on this radio? I know some are going to answer my question with another question like (why you want to do that?)
  6. F

    Stryker SR-955 high carrier with variable all the way closed.. only on AM ..

    To my understanding the AM low power variable W1 is shared with FM. On FM I’m able to lower the dead key to 1W … W10 and w501 are AM modulation.. thanks for the reply. I’m still trying to figure this out
  7. F

    Stryker SR-955 high carrier with variable all the way closed.. only on AM ..

    I recently got a stryker 955 with an issue that only happens when selected to AM. With the RF power all the way closed the radio is showing 14w and that's with the am low pwr variable (w1)set to minimum. on all other modes it works fine and I'm able to control the output like its supposed to...
  8. F

    Stryker Sr-447hpc2

    By any chance, anyone knows the VR for the RF Power meter reading adjustment?
  9. F

    Help with Cobra 2000 gtl Low AM rx

    Hello to all in the forum, I need some help with a Cobra 2000 I just got. on SSB it receives fine but on AM the receive is really low, I already checked the d1, d2, d21 and d22 as well as tr14, and they are all good. Any help will be appreciated
  10. F

    Stryker sr94hpc

    I did this Mod using a 1kohm trimpot and adjusted it using an O-Scope, this mod works great.
  11. F

    Cobra 2000 No rx audio or TX audio on am

    Should i be seeing any voltages on tr53?? i was testing for vltage and i get around 8v on tr47 but no voltages on tr53
  12. F

    Cobra 2000 No rx audio or TX audio on am

    ok checked tr12, 13, 35 & d43 and they are good... i will keep looking at the diagram to see if theres anything i can check... By the Way thank you guys so much for helping me.. im not going to give up on this.. Thanks
  13. F

    Cobra 2000 No rx audio or TX audio on am

    so in the diagram i couldnt find either the diode or jp4 & jp5 so i had to draw them..
  14. F

    Cobra 2000 No rx audio or TX audio on am

    so i lifted the diode and it wouldn't let me change channels or freq. but it did changed from 27.531 to 26.985..and still no ssb tx.
  15. F

    Cobra 2000 No rx audio or TX audio on am

    i pulled tr47 and tr53 to make sure they are good and they tested ok... any other tips where i can start to look??? thanks