You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Transistor
Hey Shockwave...thanks so much! That transistor was the culprit. I guess even with the antenna and radio both grounded things like this still happen. I will be sure to disconnect my antenna whenever possible during thunder storms.
Thanks for the replies guys. Bulb is good and last year I gave the radio the once over and replaced the old caps and cleaned the relay. I'll check the relay again and check the audio board.
My radio was working fine up until recently. My transmit is fine but the audio on my receive is very low and the meter does not move at all in the receive mode. We've had some lightning storms recently. Don't know if that could have damaged the radio? I hooked another radio up to the antenna and...
I picked the amp up on ebay. I was shocked when I opened it up to see that there was hardly any dust inside and that the contacts on the band selector were like new. The front face still has the plastic over it. It seems that this amp was not used much. The door knob caps are in great shape! I...
OK guys...The radio is NOT modified and only puts out 40 watts on AM and yes I would be crazy to try and get more out of it especially when I have a 101E. Why anyone would want one of these radios for CB is beyond me. Why would anyone pay the money for a 718 for CB use with all those frequencies...
OK...thanks to all those who have replied! I was use to tuning with the Yaesu 101E. The Icom is a different animal. Apparently the Icom does not have enough output to tune the amp in CW or AM mode. When I tuned in SSB mode while speaking in to the mic I got output, but only could tune to about...
When the amp is in the stand-by mode I have output. When turned on I have no output. The amp works fine when hooked up to my Yaesu 101E. Could it be that the Icom does not have enough output to drive the amp?
FL-2100b No Output
My 2100b amp works fine with my 101 rig. I hooked the amp up to my Icom 718 using an external relay buffer and it keys the relay in the amp but there is no power output. I was told that I would not need the ALC voltage. Any ideas on what I need to do?
Battery
Solved the problem. Seems that the battery I was using was too low. When I put a fresh battery in the squeal stopped. Sideband will work without a battery but not AM.
I wired up one of my D104 mics to my Icom-718 and I was surprised to see that it works WITHOUT a battery! How can that be? Also it performs well on SSB but on AM I can hear a squeal coming from inside the radio when keyed even if the mic element is removed from the mic base. I hooked a battery...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.