Search results

Anyone moded one of these for 11 meter? L45 jumper is not it, unless theres more to do afterwords. Thx

Picked up an s9 from a friend. He had the radio shop turn it back to peak only 35W! (IDK why, stupid right) He dont know how the shop done it, the guy at shop says he cant remember, needs to see the radio! (We know why, $40 more?) The AM mod pot is wide open, and the TGM switch doesnt...

Looking how to mod it, so it swings full power (70-90W) no matter what the variable is set on

have an older connex 3300 , (serial number 402871) with this board in it ept360022z, talk back is on at all times with or without echo. the talkback is really loud and would like to know how to disable it, quieten it, or put it on a variable. I already clipped TR39 (no change)so I put it...

Looking for older model gal 959 harnesses that attach the face controls to the board, all or some! Whatever you got. And also could someone post or (message me for my phone number to text) a couple pics of the entire harness side of the radio, so I can see where some of these harnesses go to and...

Looking for older model gal 959 harnesses that attach the face controls to the board, all or some! Whatever you got. And also could someone post or (message me for my phone number to text) a couple pics of the entire harness side of the radio, so I can see where some of these harnesses go to and...

Any thing new out for these radios? Swing kit, final upgrades(more watts), echo install .......or web sites to look at new info?

I Was fixing a new connector on my coax from the radio and before I solder it together, i check for continuity/short. Well it had continuity. took it back apart, nothing was wrong, put it back together, still had continuity. Took coax off the radio, coax was Good. decided to check the radio...

Just curious, Im running a Wilson 5k (thru the roof mount), 11.75ft of coax (1/2wl of rg58a/u), using a mfj 259b antenna anylizer' Ch 1=1.2swr,46ohms,and 0 react, ch 20=1.1swr, 43ohms, and 2 react ch40=1.3swr, 39ohm, and 8 react. I've never been able to achieve 50ohm reading on any antenna...

Anyone know yet the layout of the 980's? Which resistor goes to the talkback section? Don't know about all 980's, but my 980 talkback set on 1 is really loud, can't tell much diff set on 1 or 15.

I hear people saying, "I replaced my knob with a heavy duty one"! The one in it now is a 250ohm, ?? Watts. It has a blue plastic body . What is the heavy duty pot and where can i get one? Local radio has nothin, they suck!

Searched all the net, found nothin on carrier balance. Ch1 has a carrier of 3/4W, Ch15 has 1 1/4W, Ch25 has 1 3/4W, Ch40 has 2 1/4W. Have done the swing mod ( 100ohm resistor, 35v-470uf) vr5 (not maxed out), only till forward mod gain stops showing.

radio only swings about 8 watts, any ideas for a good amplifier? maybe around 500 to 800 watts

Bought it 1 1/2 year ago. Had copper electronics tune and convert it. (BIG MISTAKE) right out of the box, (prob #1)had to install a new antenna connector in the radio. Copper stripped it out. Then got it hooked up and, (prob #2) 11m am worked good, 10m and 11m ssb was horrible. Sounded over...

Just wondering how good or bad the 25/29 lx based radios are liked compared to the classic line? An SSB radio (148gtl) I think would complete the lineup nicely. What do you guys think? Yes, no, maybe?

Have a s45hp sittin on the desk bout 2 months, no probs up till now. Out of the blue, turned it on yesterday, wham, LSB has 70w carrier (no swing), USB has 10w carrier,(swings to 70w) AM and FM Carriers are normal 16w (swings to 70w). Changed mics, coax. pushed around on the board no change. Any...

Any suggestions for a mobile radio with a detach front panel that can be used on 11M, Don't have allot of room for the traditional CB radio, only place is in the center armrest, but have to lean forward to see the display. Very Inconvenient!

I have a wilson 5000 roof mount antenna on a quadcab truck, mfj analyzer reads, ch1-40 with SWR 1.2@51ohms@2z`s. Change antenna to a comp series predator 10k using the comet adapter, the mfj reads, Ch1-40, SWR 1.2@36ohms@0z`s. Is this mismatch in ohms going to hurt/affect anything? IF SO...

Anyone know how to change the tone of the roger beep? I found how to change the length, and volume of it. So far no one knows how to change the tone. Thx

Our city police just swapped to digital from VHF analog. Is there a scanner that will receive this digital signal, is it the same as digital trunked systems?