• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. B

    grant export as good as grant cb ?

    uniden grant xl This thread would be for davegrantster.Hey dave i totally agree with ya on the grant xl being one ass kicking radio period!.Mine dead keys 4 watts swings to 18-19 watts,and thats good for me,bigun297 said that and i'm gone.
  2. B

    general lee

    this guys problem is no carrier,no modulation.I can see it key up on the shop radio,and it sounds really good.Its on frequency,Mabe the audio amp 827?,has audio in the pa mode,good echo so the echo board is not the problem,not the audio chip?.Ok guys i need yo alls help!. bigun
  3. B

    courier pll spartan!

    OOOOOOOOO! boy this one has been in the garage for quite some time.This guy brought it to me the other day,say's ya think ya can tune it up!.Hahaha we'll we will give it a try.Problem i first saw,or heard was like a siren sound coming from the speaker.Plugged in my external and same thing.Radio...
  4. B

    Mirrage 88's

    mirage 88s Best thing to do is try ray at galaxy.Tell him you need a frequencie board for the galaxy 88(older style)This board should plug right in.Let me know how it goes!.OOOOO by the way here's his e-mail, ray@galaxyradios.com bigun297.
  5. B

    mirage 88

    Ok! guy's my question is is the radio worth a sh-t?.The other question is the frequency readout does not work!,any areas i need to check?.Ive checked all the plug'ins they all look good.No lose solder joints that i can see right now.Another thing is the . in the frequency readout is working...
  6. B

    Stryker HI/LOW switch

    amp mod! Just a thought? Could you insert inline after the amp output to the antenna,an ajustable trimmer pot(able to handle the output power)Just a thought! bigun :?:
  7. B

    connex 3300 hp

    connex 3300hp Yes the D-80 is under the echo board.Remove the echo board(2 screws)it's right in front of the large transformer on the right side of the radio towards the back if your looking at the radio with the speaker cover removed.It' a small diode so you gotta look close. Hope this helps...
  8. B

    tuning a Magnum S-9

    magnum! sounds like i would'nt own a magnum,i will stick with galaxy thank you!. bigun297
  9. B

    NEED YOUR OPINIONS

    4300/300 Iv'e had a lot of truckers want this radio! i want to know how you can get 600 watts out of this radio? when out of the box with a GOOD! alignment can only get 400 watts,let me know please cause i will buy one for the shop. :D(oooooooooo! did it NOT!come with the 2879s).
  10. B

    Help

    coil Naaaa! i have seen coils spread like that before i would'nt worry to much!(i have seen them from the factory out of the box like that)
  11. B

    Loudest Export radio out today?

    loud! We'll i have a galaxy 33hml that dead keys 7 watts on high,like it's supposed to!,and it has very good reports around pratt,swings to 20 watts, and thats good enough for me.It depends on antenna swr's,grounding is a must,and use a good mic.Depends what day it was made to,hahahahaha...
  12. B

    rat shack trc 446

    trc 446 I got it fellas,pain in the ass but you really need to have jumper wires when you go from 4-pin cobra mike to 6-pin rat shack radio.Thnx for ya'lls hep! bigun 8) p.s yes bushwacker it came with the mike that had the up/down buttons and lock,but the old boy that brought it to me...
  13. B

    connex 3300 hp

    connex 3300hp Yes he's right it's (D) later bigun 8)
  14. B

    rat shack trc 446

    trc-446 no! it's got a damn 6 pin standard plug like on the ranger radios hahahahaha! see ya . bigun297
  15. B

    rat shack trc 446

    trc-446 Thanks for the info sir,really appreciate it. bigun297 8)
  16. B

    rat shack trc 446

    6 pin plug Bushwack i dont know why it did'nt come with the din plug!.BUT! the radio was givin to him and he was wanting me to wire his 4-pin cobra mike to this mess,i think he ought to call rat shack and try to get the original mike that was supposed to come with it. bigun297 :D
  17. B

    rat shack trc 446

    Anybody tell me the wiring code for the 6 pin on this radio?.Any help would be appreciated,have a guy that wants it for a backup radio,(dont know why!)but to each his own.Thnx bigun :?
  18. B

    magnum 257, i am impressed

    magnum 257 Hey fellas thnx alot for the info!,i took it upon myself to check it out yesterday and i figured it out with the jumper pin,but the call button and the lcr threw me for a loop at first hahaha!,But to no prevail i got it.Ya'll have a good one. thnx bigun297 :D
  19. B

    magnum 257, i am impressed

    magnum 257/conversion Ok fellas how in the world do you convert it to 11 meters?,please help!. bigun297 :?: