Search results

Yes, those are the colors, thanks, Adam!

Hi all, I have a transformer here for the Console V, can anyone possibly tell me which wires are input (120VAC) and which are output or better yet a picture of the transformer in the radio showing the wires? Thanks for any help. Adam

Hi, did you ever get this working on 11 meters?

OK, I'm not sure what to do next so I will take my shovel out to the back yard and give it a good burial. Again, thanks to all who tried to help. Adam

Oh well, I refklowed the contacts for the pins on the BA board but no help. Power is in the radio but nothing on the front panel lights except when I switch from AM to USB or LSB, the SSB light does light up. Adam

AND thank all you good peopel for trying to help, I appreciate it. Adam

I will also reflow the solder points for the connector pins on the BA board

Yes, I pulled the board, it looks good, no bad parts, no cold solder joints, I will clean the pins with DeOxit and look carefully all over. Thanks, Adam

Hi KneeBiter, the BA board has a heatsink with some transistor sort of glued to a cross piece to hold the heatsink, I will undo that gunk holding it carefully and pull the board, back soon. Thanks, Adam

Hi, thanks, it reads 20.8162mhz which I guess is a good thing? Adam

Hi, thanks for the clarification. Do I unplug the RCA plug and test at the plug or jack? Thanks, Adam

FYI I was able to adjust the S meter zeronig, I can move it up and down and zero it so that part of the circuit is active! Adam

Hi, when you say the top socket at the top reer do you mean where the last crystal is? It's soldered in if so, where do I attach my frequency counter? Thanks, Adam

Hi, will check both later, I am sure neither will work. Will report back. Thanks, Adam

Yes, it's had some work done and really crappy work at that. I see some solder pads that were burned away so they had to jumper a few spots. I thought I had found the problem just now, I noticed the grey power resistor in the picture had one end that had been soldered but it did not hold and was...

Hi, yes, it's a"beater", I'll try re-seating what I can. Thanks, Adam

Thanks KneeBiter, pictures posted. It does not have good looking work that has beenm done inside. Adam

Hi all, I received a Tram D201A that was supposed to be working and when I turn it on ALL the tubes light up but no power that I see anywhere else, no meter lights light up, so sound, controls appear to do nothing. The radio has 3 fuses a that I see and all are fine. The switch that I believe...

Now that was a good suggestion, I just checked but parts are correct, they match service manual but I am guessing 1 or more is bad. Thanks! Adam