• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. L

    palomar 200x amplifier has a problem

    I have a amplifier that blew a bottom filter capacitor 450v 100uf both were put in a couple months ago i believe they were around 50.00 dollars for the both.have had no problem til now i had a used one that came out of it after powering it up again it blew also.checked the fuse it was a higher...
  2. L

    need some info on a president dwight d cb

    i bought a nice dwight d and after taking voltage off the switch i notice it had 15.3 volts i was pluged in to ac power if this voltage is high is there anyway to lower it .....also would like to lower the watts down to around 1 watt but was told this could not be done on this type of radio...
  3. L

    cobra 29 ltd driver info needed.

    I have a cobra 29 that i am doing a supertune mod on .do you need to use the stock driver c1957 or can i use a 2314.the final is a 2sc1969.thanks
  4. L

    galaxy dx 44v high pitch or ringing sound

    when receiving on channel 14 i have a high pitch tone coming in while someone is talking. this only happens on 14 .i have tried different mikes, checked swr ,soldering joints, grounds.this radio has never been worked on and still looks news.I could live with this high pitch tone but channel 14...
  5. L

    Cobra 29 ltd yd1022 audio chip voltage.

    Looking for the voltage for the pins of the yd1022 audio chip...its seems to be different from my other working cobra 29 which has a different chip.
  6. L

    cobra 29 ltd no modulation output.

    radio has good receive 5 watts on key up just no modulation output.had been working great but now it has me stumped.what has been tried all new caps check all tr transistors ,regulator, predriver driver final also replaced ic1 2 3 4 with new ones.mic gain rf gain pots checks fine.i tried a...
  7. L

    mrf454 transistor installation.

    Need some information on how to power up a set of 454s after being install in a 200 watt penetrater.I have a variac adjustable power supply.Transistors has the pot above them for voltage adjustment but havent a clue what voltage to set these on.Any information on how to do this would be greatly...