You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
i need to find out what the brown disc caps are down around the tubes. The schematic(CB Tricks)is blurry & it's not too good a situation inside the Eagle to see what thy are.
you can adjust the top to about 25 & ¾ inches, the gamma rod to around 22 & some odd fraction... may want to put support @ the top of the ring identical to the center support(s)piece
You don't need a 8 volt source, use the 12 volt off the on/off switch.. echo board,you"ll have to disconnect the black wire from the mic board,solder "in"(white) directly to pin 2 on the back of the board, out to black wire, both grounds to the mic board ground.
I've read of what's been posted about installing an echo board in the Galaxy 959's...but which wire(s)do I use to hook it up to? brown(going down to board along with the red)??yellow is transmit ,red is ??My board has two white leads ,one in, one out plus the ground shield
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.