• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. OldTech03

    UNIDEN BEARCAT 880 BEEP REMOVAL

    I don't know if anyone cares about this one way or the other but I had a customer the other day that asked while I was repairing his 880 if I could eliminate the damn beep so after I brought it back to life I did some circuit tracking and came up with this in about 20 minutes or so.
  2. OldTech03

    SILTRONIX MODEL 90-3

    Does anybody have one of these for sale? Siltronix model 90-3 for Mark III working or not working?
  3. OldTech03

    SUPERSTAR 121 & OLD HOOKER 100 REPAIR & RESTORE

    Too much to talk about here and I have little time but wanted to post this so Todd could get a look-see I still have a few things to touch upon this restore but for the most part, it is FINISHED!!! There was not much about these that were correct although they were complete they had many...
  4. OldTech03

    CX3300 HP FOR CABOVER BOB DIGITAL S-METER

    We completed a number of mods and alterations on this also fixed some issues but we won't talk about those. This is just for Todd so he can see where we are at with this job we should be done with this before too long.
  5. OldTech03

    TS-5010 W/TS-5011 UP FOR OFFERS

    I have this beautiful example of a Mint condition TS-5010 with matching TS-5011 Power supply. I do accept PayPal and try your best to be serious with offers this is as close to mint condition as one could hope to find. I fully serviced these units and tested them SSB power is around 40+ watts...
  6. OldTech03

    Restore of Yaesu FT757GX and Matching supply restoration.

    This was one of the 4 solid days of trying to get this done for a customer that wanted this ready for Christmas???? Well, I got it done. First, the 757GX needed to be repaired in several areas It didn't xmit, It didn't receive well, the display readout didn't reflect the actual frequency it...
  7. OldTech03

    FTDX9000 Repaired

    Well, Customer picked up today after repairs to antenna switching board and Mars conversion. These are monsters 72lb's. He also wanted it freshened up a bit so the bezel and cabinet were given a fresh new look, It is quite the machine made contacts on 6 meters and 10 meters.
  8. OldTech03

    Yaesu VR-5000 Shortwave AM FM VHF UHF SSB Radio Receiver 100 KHz - 2600 MHz

    For Sale: Make an offer if interested it is posted in eBay for $519.95 which includes shipping. This sale is for a very nice Yaesu VR-5000 receiver scanner that has wideband receiving capabilities. Reception on this receiver is outstanding and there are no shortcomings or issues to report...
  9. OldTech03

    YAESU VR-5000 RECEIVER/SCANNER 100KHZ to 2600 MHZ

    This sale is for a very nice Yaesu VR-5000 receiver scanner that has wideband receiving capabilities. Reception on this receiver is outstanding and there are no shortcomings or issues to report with this unit. Many of these receivers have an issue with dropouts on the display, but this display...
  10. OldTech03

    President McKinley for William in Texas

    This is for William from Tyler TX. The Mckinley is done! Ok, William, this was an adventure in reverse engineering kinda-sorta I had to undo some things that must have been done by someone dwelling into the deep dark areas of internet shade tree technology. That being said the radio worked but...
  11. OldTech03

    RANGER 2970N2 SHIELD NEEDED

    Had this sent to me for repairs: I managed to fix all the obvious issues but unfortunately the amp case sheild is missing and that doesn't work well in these the amp must be shielded and although I can fabricate a shield I would love to find one. Anybody knows where one could be found or does...
  12. OldTech03

    Galaxy DX99V back in service

    This is Unit# 46 repaired in the last 6 weeks while working another full-time job!! Wow for me. Anyway, this is one that was done for a WWDX member which I will not mention. the image below shows the Restored top cover.
  13. OldTech03

    TRAM CORSAIR FINALLY FINISHED WEW!!

    After many months of tracking down parts and dealing with floods and moving to another state, I finally got this done.
  14. OldTech03

    Finally got the Bench together just some tweaking to do.

    Well, I finally got things to a place where I can begin working! There will still be changes made over time as I see a better way to set things up and of course there are the usual little issues that crop up in any new bench but they will be dealt with as the need arises. I'm using an Antron 99...
  15. OldTech03

    Ever wonder what a $1600.00 Processor looks like?

    Well sitting on my table right now is an Intel I9 Unlocked $1600 dollar chip. I also have a terabyte drive that is about the size of half a credit card literally! Scotty we need more memory right now!!!!
  16. OldTech03

    Looking for an Accurate RF meter this may be it?

    http://www.microham.com/contents/en-us/d201_SMORF.html
  17. OldTech03

    Here is a 29 you guys may want just look at that scope..

    www.facebook.com/marketplace/item/373917399879534/
  18. OldTech03

    It's beginning to look a lot like Christmas!

    6 inches in the last 3 hrs. This image was taken just a few minutes ago. Come help me shovel, please!
  19. OldTech03

    Some blasts from My/The Past Been going through My Stuff

    Looking good for 116. LOL!