• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Landmatic / RF LTD 357

swp411

Member
Jan 5, 2016
4
0
11
42
So guys i dug this out today, the radio is cooked but i was thinking i could rig up the rf deck as a stand alone amp. Below i have supplied a few pictures, can anyone tell me what i need to do with these two wires?( in the radio they are the 2 going to the mini coax connections next to each other, and on the rf deck they are terminated the same way) do i feed them voltage? Also what wattage do you feel is safe to send into this deck? the deck is 2 sd1446 and the radio had 1 mitsubishi c2312. I have already figured out the keying wiring, please help me out, this is just going to be a stand alone unit if you folks can help me out. Thanks in advance.


https://www.dropbox.com/s/j70ziuyspbk8dgn/IMG_20170414_180148.jpg?dl=0

https://www.dropbox.com/s/lw5zbojyunm71p5/IMG_20170414_180312.jpg?dl=0

https://www.dropbox.com/s/klbz1zzbq5wvd3n/IMG_20170414_180455.jpg?dl=0

https://www.dropbox.com/s/c6i8udly8mrkdyr/IMG_20170414_180544.jpg?dl=0
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated