Need AM Freq. Adjust on EPT360014B Single Final AM/FM only Board

[Wire Weasel]

Hi guys, Still trying to make an adjustment for a friend. Is a Galaxy 55V, single final, AM/FM only rig. Board is EPT360014B. Had clarifier but was locked off and knob slot replaced with echo. Rig has drifted down to .xx4 both on radio's counter and confirmed with external freq. counter. Want to bring it back up to .xx5

CBtricks has the service manual but doesn't state exactly how to Adjust AM Frequency. This info may be included in the PLL/VCO Alignment but doesn't say in plain English how to adjust freq.

Web searches of the board all show the larger board version for SSB radios using this board and show VR21 as the AM Freq, Adjustment ..... but this radio has no VR21 as shown and again is the AM/FM only version.

Can anyone here help figure out how to adjust AM frequency on this thing? Thanks !!

 

[Robb]

L20
http://www.cbtricks.com/radios/galaxy/dx55v/dx55v_pll_adj.htm
L26
http://www.cbtricks.com/radios/galaxy/dx55v/dx55v_trans_adj.htm

But I would go thru the entire chain of alignment data to ensure that it is correct on all freqs.

BTW - where is my egg roll?

 

[ExitThirteen]

Robb, you don't have 5000 posts. No eggroll for you!

~Cheers~