Ok guys here the issue, it was given to me and had been dropped on it's face and broke the two sides that hold it on. I got that fixed with epoxy but the channel selector board was damaged. All the wires from the ribbon connector (soldered not plugged) got broke off, so I need a picture of another one to know where to put the wires back. The traces were damaged when the wires got ripped out. Radio side is ok just the selector side was damaged. I know not many people still have these old radios but it did work great until this happened and would like to get it fixed. I'll try to see if I can post a pic of the issue and hopefully some one will be able to help me out.
