Galaxy DX Radios DX929
Documentation Project

CBTricks.com
Transmitter Alignment
See Alignment Locations

SETTINGS CONNECTION
ADJUST
ADJUST FOR
AM OSC:
Set radio to CH 19 AM TX mode.
Connect Frequency Counter to TP5.
L23
10.6950MHz ± 10Hz
TX Power:
Set radio to CH 19 AM TX mode.
Set SWR/MOD/PWR Switch to PWR.

Connect RF Power Meter to antenna jack.

L40,L42
L43,L44
MAX > 12W
Balance Power Between CH1 and CH40.
AM TX High Power:
Set radio to CH 19 AM TX mode.
Set RF POWER fully clockwise.
Same as above.
VR14
3.8 W
AM TX Low Power:
Set RF POWER fully counterclockwise.
Same as above.
VR18
0.3W ±0.2W
RF Power Meter:
Set radio to CH 19 AM TX mode.
Set RF POWER fully clockwise.
Set SWR/MOD/PWR Switch to PWR position.
 
VR9
For a needle reading of "4" on TX PWR scale.
AM Modulation:
Set radio to CH 19 AM TX mode.
Set MIC Gain fully clockwise.
Connect AF SG to microphone input.
AF signal 30mV, 1 KHz to microphone.
VR16
For a needle reading of 90% on the external modulation meter.
AM Modulation Meter:
Set radio to CH 19 AM TX mode.
Set MIC Gain fully clockwise.
Set SWR/MOD/PWR Switch to MOD position
AF signal 30mV, 1 KHz to microphone.
VR15
For a needle reading of 90% on the modulation scale.

Copyright © 2003 CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.