|
Board
# EPT690010Z Ranger Comm. INC (SHA)
Looking over the front of the unit with component side up and DC power
removed.
1. Find the Black Shorting Bar behind the Eco/Time Pot.
It should be shorting out the middle and right pins.
Move the Shorting Bar left so it shorts out the middle and the left
pin.
2. Find J4, a two (2) pin male connector, behind and to the right of
VR3.
There is a female three (3) wire connector, with a yellow, green and
violet wires plugged onto J4. Unplug the female three (3) wire connector
and plug it onto a empty three (3) pin male connector that is just behind
the Black Shorting Bar you moved left in step # 1 above.
3. On the back of the Band Selector (A,B,C) is a white and a red wire
on
pin # 9.
Move only the white wire to pin # 10 (Pin Ten should already have a
black wire on it).
David, of City Electronics
|
Mic Wiring
Stock
1-Shield
(ground)
2-Yellow (audio)
3-Red (transmit)
4-White (receive)
Astatic
1-Shield & Blue
2-White
3-Red
4-Black
Yellow NC
Turner
1-Shield & Red
2-White
3-Blue
4-Black
Yellow NC
Sadelta
1-Shield
2-White
3-Brown
4-Green
|