• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!
sp5it

sp5it

Master of puppets From Poland
Messages
2,883
Reaction score
4,013
Points
273
Joined
Last seen
Viewing latest content

Profile posts Latest activity Postings Albums About

  • M
    OK Got it... you used the IRF 9530. My bad. How did it go? I sell a bunch of the KL203. It is a good little amp for 80-100w out. Seems to handle 20w drive with no issues. I just keep RM3's and spare boards on hand.
    sp5it
    sp5it
    Output is little less than original, but you can't go wrong with 1$ transistor :)
    M
    Did you really replace the little RM3 Mosfets in a KL203 with the larger EKL 9530 mosfet?
    Any pictures? Surprised you found enough room. Be an interesting amplifier! Did you need to change any other components?
    Rooster 903
    Hello, I found this information in a post for the Stryker 447 hpc2, it looks like you were initially sent the wrong schematic, is the information for the 497hpc? Thats what I need it for, thank you in advance for your help.

    C189 is a spot to place diode/resistor combo.
    R249 AM limiter
    VR14 am mod pot

    Change R241 to 15 Ohm.
    J
    Thank you very much for your advice on my galaxy ,the biasing diode was bad and the driver on one radio.Thanks again.Jef
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back