• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!
nomadradio

nomadradio

Analog Retentive From Louisville, KY
Messages
7,626
Items
2
Reaction score
12,532
Points
698
Joined
Last seen

Profile posts Latest activity Postings IMS Items About

  • S
    Breaker 14 how bout ya Nomad, I installed a Fairchild MOSFET conversion in my Galaxy Saturn and now have no tx power, and the lights dim when keyed, going through the power supply board I did find a bad capacitor and replaced it, voltage picked up some, and now it's more stable but still dims on key up and no rf output. Any advice would be helpful, thanx
    R
    Hi There! My friend just received an old Realistic TRC 55 base CB radio.,
    What is the function of the PA Gain knob?

    Thank you,
    Recon 881
    Jeremy Wendt
    How’s it going,
    I hope you’re doing ok.
    I can’t get my mark 3 to have a long scream.
    All mine has is a short ping.
    I replaced the capacitor C66 no change.
    Jeremy Wendt
    Morning,
    Can you tell me why my mark 3 Carrier is dropping when the radio gets warmer.
    It’s fine at first, but the longer it’s on the
    carrier drops.
    Coffee
    I have a d&a maverick that I'm wanting to replace some parts to. I want to replace the caps and some caps and ceramic disk caps. A couple look bubbled up. Evidently going to replace all the tubes. I read your post about how you replace the caps. Do you sell them? Thanks David
    1iwilly
    GM nomad my paypal info is jvillafane@aol.com this is for the cobra 2000 gtl 5 pin mike jack board with wires and location of wires thanks
    T
    Nomad
    I did the best I could by looking at one wired differently in an effort to get the other working...omg what a mess. I know one thing, you get in the wrong place, it will knock your ass on the floor Thanks for reading and stay safe. 386-916-2828
    M
    Hello Mr Nomad.
    I am interested in purchasing your circuit for increasing the drive on a Siltronix model 90 for a Browning. Please advise if these are still available and how to proceed with purchase. Thanks and 73s.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back