pin 3 wire> PTT switch> pin 5 (ground/shield). No resistance.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Anytone At-6666 Pro
- Thread starter Eldorado828
- Start date
Thanks for the answer.
My QTH station is ready. I will continue with GoBox.
Antennas on the roof. JN86JU
Tnx & 73!
Attachments
Shadetree Mechanic
Delaware Base Station 808
I put the 6Pro in my truck in place of the 86v with RFX95. The noise reduction feature is super nice on the receiver and the radio is narrow enough to not interfere with the sun visors. I believe this is still the smallest mobile with SSB.
Last edited:
Shadetree Mechanic
Delaware Base Station 808
In case the video goes away, the procedure is:
Hold PTT, Mode and Memory while powering on.
This method no longer works. It was removed by the factory on all new versions because of the mistakes being made by people without the knowledge or the test equipment needed.
To reduce these user issues, and still give the PRO market what they need, AnyTone have released a PC Alignment Tool to allow a safer and better way to perform alignment on these radios.
See here: https://www.worldwidedx.com/threads...irmware-pc-alignment-tool-pc-software.268861/
The same solution will come to the AT-5555Nii / QT-60 PRO (short case) soon.
73
We've seen our fair share of golden screwdrivers come through here crying about the brick they created.
It's probably best to make these new radios GOLDEN SCREWDRIVER PROOF.
It's probably best to make these new radios GOLDEN SCREWDRIVER PROOF.
That's why the software tool was created. It's a barrier to entry that will stop most basic users from even attempting adjustments, (the same ones who made the keypad service menu mistakes in the past) but for those PRO users that need it, the PC tool is the keys to the castle.
IMO it's awesome that QX understand this, and are giving us this option.