Search results

I don't know if this is relevant, but this shows some substitutions. http://www.nostalgiaair.org/Tubes/6JS6C.htm

OUTSTANDING! Thanks a bunch. I imagine a 1 watt minimum zener will be OK

Does any body happen to know what the 2 diodes are that are in this controller/ There are 2, D1 and D2, but the manuals only give a CDE part number. 1 is listed as a zener, and another a 100 PIV diode. That's all the info on it I can find. Thanks for any help

A small price to pay for the love and sense of well being they bring.

An old proverb, "No good deed goes unpunished"

I'm generally very careful and follow all safety precautions on anything I probe.:) Thanks

I hate to say it, but epay. Guy in CA had 2 for like $12.00. However barkett and RFParts has them as well

Has anyone used or owned one of these. https://www.aimtti.com/product-category/frequency-counters/aim-tf900series The specs seem good and it's Made in England (Great Britain), There just doesn't seem to be a lot of information as far as reviews for it. One guy on utube has a review, that's...

Replaced the 5082 and now have 10.24.

1.047 V, however no 10.24 output on AM-FM. In the SSB modes I get about 8 MHz @ pin 1.

I had my counter set to MHz at first, switched to kHz showed the signal frequency. That got me to looking at the data sheet a little more and I see how you got me there. I don't have a very good knowledge of what the ic does, so thanks. So with all that's going on with the 5082, it looks like...

Actually, I have 5V at the pin5. My meter lead went goofy.

So further, shouldn't pin5 of the 5082 have like 7V or so? I have nothing at this time

You are correct sir.

With the scope on pin7 of the 5082P and pin7 of the 2081AP, they connect, I get this image. It's a snapshot, best I can do. But it does appear to have signal unless I'm mistaken. No voltage or freq showing on pin7 though.

I found the 5082P datasheet. Only it's in Japanese I believe. Also this diagram. Looks like IC5 (TC5081P) comes in to play as well. I've just been tracing back on the schematic to anything tied to the blown capacitor I had (C103).

At pin 2 and 3 of the tc5082p, I get the 10.240, but nothing out of pin 1. Should I have the 10.240 @ pin1? Thanks.

Working on an old school 2950, orange face. I found a shorted C103, may have been inserted with the wrong polarization. I replaced that cap, and going through a PLL align, I found I can't get past the first step which is looking for the 10.240 at L61. I think L4 (IFT12251) might be the culprit...

Galaxy service is one of the best. If John is still there you should contact Galaxy and see what say. He knows these radios in and out. This is the number I have : 1-760-480-8800