Search results

Radioddity appreciates the WWDX forum member brand loyalty. I have arranged a discount code, that can be used outside of other major sales events. I do test their radios, but receive no compensation from Radioddity. They are good people there, that stand behind what they sell, where others do...

It is the AT-5555N2 Short chassis QT-60 Pro

ON discontinued the part.

No change in bias. Added a cap.

I bought mine from mouser.

The service mode access key was changed in the current firmware version. The firmware in the video, is an older version, that is easier to access.

I have done this mod and it works. I am having good results with IRFZ24's replacing other FET's.

That's a great idea for a firmware update, if it is possible to manipulate the hardware to do this. I can't say I completely agree with you or Qixiang on this though. They don't warranty the radio, so once you buy it, you are dead to them. Why should they care if you toast your own radio?

If you don't have access to service mode, you can't do it. I have yet to see a radio from Qixiang off, out of the box.

Mine does 49 PEP on 25m. No complaints from me, especially when 10 and 12 are in the toilet and 15 is cracking!

I have used it quite a bit, for interconnects in repeater cabs.

Is the FQP13N10 now obsolete? I try to avoid using obsolete parts, it's hard to duplicate performance and reliability in the event the devices need replacing in the future.

Personally, I am not a fan of it. I have purchased hundreds of thousands of feet of it in my professional life, regretting a lot of it. At HF, I use RG-8/U whenever possible.

IC4 8 volt regulator MB3756 Pin 1

Double it for Dosy.

9913 is not RG8/U. Unlike RG8/U and it's military designated counterpart RG-213, 9913 is an air dielectric cable. Which is not used outdoors in the wireless industry, due to water intrusion/condensation.

DOOSY

Unless it's a Daiwa, then it's a 1/4.

The difficult part is that you need to have the 3 board service kit to properly work on this model It was rather expensive to buy from Yaesu, close to $400 for 3 extender boards. The other difficulty, is getting parts. I used to work on this model and have the service kit. What is wrong with...