Search results

Thanks, Dman s for the pics got side track with this heat here in FL

I left it at 47uf. The best outcome was that I found 2 loose ground wires.

just pick up on it :ROFLMAO::ROFLMAO:

street language relay clicking off and on. electronic term= latch time. never tried on SSB until a few days ago. got my answer from the previous owner today he wrote When you key the mic on SSB you get no wattage until you speak. The mic will pic up room noise which you can see on a watt meter...

well, mine has a 47uf i tried the 470 relay hangs too long on am the good thing was i found 2 loose ground straps one did not have enough solder and was just dangling 2nd one was missing a screw, and put the 47uf back in.it is what it is 108 feels like in FL today thanks for the info anyway was...

well, today i got a chance to look at the bottom of amp no 22uf i believe the 1000uf is the correct place for ssb ???

i thought i would do better with the 101e to drive the 300a and it's not i guess i put my foot in that one LOL where did that come from

for a quick experimental, i did try it on hi total dead key of 180 put the 101e only dead keying 2 watts to give me the 180 dead key, and yes saw the same output as with Cobra 2k i cut back on mic gain so not to drive it too hard

i understand what you saying what i can understand 5 watts from the 101e gives me a 75-watt dead key on amp low side the 101e with new tubes is showing about 105 watts pep i thought i would do better with the 101e to drive the 300a and it's not

so i had a chance to mess with it when i first got the amp i adjusted the high side one when i was only using my Cobra 2k originally it was like 1.6 and i got it down to 1.1.moving forward to the new Toy 101e radio is tune for best it could do seen normal power as the book states i see the...

The update got er all fix re did the boards with an eraser and then wipe them with an alcohol swab and re-check the clarifier voltage on point 3.64 thanks for the replies

I'm using an external freq counter at the moment from the back of the radio rca says rf out sitting at 3.62 volts with the clarifier on or off i just bought the Yaesu YC-601 Digital Display to make it easier but i won't see it until 2 weeks from today now lsb freq is 27.3835 right and USB...

i have 2 of them getting rid of one to make room for new toys

thanks yes i did them already so that part is all done now i need to fix the off-frequency part

i got this new to me ft-101e today i had a chance to test it on 38 lsb. i did the clarifier voltage adjustment according to the guy on youtube and online service manual the other person said i was off frequency so i dial him in with a clarifier in the off position and ended up being on 27.3829

i have this used turner plus 3 that has pitting on the pair as most do for the age works as it should asking $40.00 plus shipping wired for 4 pin cobra

r114 was changed to 10k c46 was changed and the asymmetrical mod and the clarifier was already moded when i took possession of the radio

shipping is $20.00 per post office

sorry about that some of the dc boxes are rf dirty and old neighbors still have old electronic like computer speakers but i'll look into it as plan B and i snuck my cb antenna in the backyard them sumamabitches fine me $1000 because i didn't move fast enough to re paint my driveway

i'm not trying to run dc boxes as base amps i rather stick with base/ac i'm in an HOA area so far i'm doing good with the 300 watts from the Palomar