• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Search results

  1. my2995dx

    Ranger 69ffb4

    Got low pass hooked up it's.still reads 3swr on lower channels but hook up my other radios and. 600 Palomar there 1.3 swr maybe this radio needs look at.
  2. my2995dx

    2995dx

    Question AM on this showing 100w sideband anywhere from 15-35w
  3. my2995dx

    Ranger 69ffb4

    Ordered one
  4. my2995dx

    Ranger 69ffb4

    Stays the same
  5. my2995dx

    Ranger 69ffb4

    Question on this 69ffb4 when I have it hooked up to A99 I get higher swr on lower channels 1.8 now if I hook up my 98vhp or any other radio it's at a flat 1 would that be due to the amp section in this 69ffb4.
  6. my2995dx

    2995dx

    Got it
  7. my2995dx

    2995dx

    Ok thanks
  8. my2995dx

    2995dx

    On these I see someone put a meanwell s 350-12 power supply in it but I do know when you key up the fan on it dies way down and it adjust all the way to 13.5 volt.I have a meanwell S 400 12 I thought about putting in wasn't sure on what sizes there putting in these
  9. my2995dx

    2995dx

    Well it was new so I took it back and got my money back for now I'm sticking with old trusty
  10. my2995dx

    2995dx

    It's up and running here my meter was all screwed up.I got a new one well it was bad so got out my old one re-set amp tested the AM voltage regulator it was bad put in a new one and all is good
  11. my2995dx

    2995dx

    Going to check that there is a shipping delay on the transistors I ordered should have them Monday but in the mean time going to check gate voltage
  12. my2995dx

    2995dx

    It reads DC current
  13. my2995dx

    2995dx

    Going to dig in her more in the next day or two and see ordered new driver and final but there a few days out
  14. my2995dx

    2995dx

    I'm getting 0 reading nothing so something is wrong
  15. my2995dx

    2995dx

    I have hooked up a meter checked i tested the AM reg seems fine and it's a pnp transistor now with this having MOSFETs driver and final is the procedure the same as older ones or do you set the gate voltage like you do in the amp.
  16. my2995dx

    2995dx

    New amp in set the gate to 3.80v now went.to check the driver and final bias I'm not getting anything at TP7-8-9
  17. my2995dx

    2995dx

    The new amp boards is the bias set at factory or does it have to be adjusted after hooking it up
  18. my2995dx

    2995dx

    Ok I do hear a click with amp hooked up but my mistake radio with amp unhooked does 3 watts I said 50 but I forgot I put the meter on 20w scale
  19. my2995dx

    2995dx

    With the plug disconnect radio still does 50w pep so is that saying the amp MOSFETs are bad.
  20. my2995dx

    2995dx

    Will do
Top Bottom
Back