• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Search results

  1. my2995dx

    2995dx

    Amp seems to look ok but I do see a meanwell sp-320-12 power supply in here voltage test on that is 13.6 and.that is turned all the way up I don't see anything burnt on board got 4 irf520 in it
  2. my2995dx

    2995dx

    Will do
  3. my2995dx

    2995dx

    I'll find out when I pull it apart Just in case I ordered a new amp board
  4. my2995dx

    2995dx

    Ah ok going to get cracking on it Saturday to see what's going on with it
  5. my2995dx

    2995dx

    That's what I'm leaning towards amp not being keyed just got to find out why
  6. my2995dx

    2995dx

    Question picked up a 2995dx with the MOSFETs in it what is pep on these I'm getting about 50w Am and 20w sideband came with a UTB board in it but doesn't work might take that out I had one years back it had the 2 pills in it and that did about 190w pep.
  7. my2995dx

    RCI-2990 Service manual?

    Got a replacement got lucky that part is good to.go now I got.a problem with receive when I touch the board at R145 receive is normal when I leave off it dies out and the same if I touch the top of the resistors it will pick up I got this a few months back at a sale
  8. my2995dx

    RCI-2990 Service manual?

    Know this post is old but anyone know what ohm's the channel encoder is in the rci 2990
  9. my2995dx

    Palomar 300a

    Looks like they ran a jumper on the negative side of the high voltage cap to ground on the 4 tube board take it they lost ground that's why they did that have to pull board out and check it
  10. my2995dx

    Palomar 300a

    Got it this 300a going to need some work was given to me both high voltage caps leak one end cracked open and someone ran a jumper wire off the high voltage cap 1 and attached it to the board
  11. my2995dx

    Palomar 300a

    I heard years back if you have a radio with MOSFET don't run it in a tube amp is that a bunch of bull.This was about 20 years ago
  12. my2995dx

    Cobra 2000 gtl with No transmit limited receive.

    Yeah I know but I'm waiting on my freq counter to come so I can set it up as pre directions even still i.can get it all hooked up in the mean time
  13. my2995dx

    Cobra 2000 gtl with No transmit limited receive.

    Will do pretty darn easy just waiting on a freq counter with test probes to come hoping this Saturday to install
  14. my2995dx

    Cobra 2000 gtl with No transmit limited receive.

    I.got one of these dds-vfo was going to try it out I like the look of it
  15. my2995dx

    Cobra 2000 gtl with No transmit limited receive.

    On these radios where is a good place to tap 13v off of
  16. my2995dx

    Cobra 2000

    Ok thanks the ic3 taken care of and it's working so someone must of been in this before for some reason good to go now.
  17. my2995dx

    Cobra 2000

    Just looked at schmatic seems pin 6 is positive supply voltage unless someone before was testing but sloppy work if it wasn't re attached to the board
  18. my2995dx

    Cobra 2000

    Question check this out more I found ic3 chip the 6th pin in from the left not attached to board shouldn't they be all attached
  19. my2995dx

    Turner ssb+2

    Picked the turner ssb+2 up now it is wired for a 5 pin want to put this on my cobra 2000 after looking at the wiring Pin 1 white Pin 2 shield Pin 3 red Pin 4 is a jumper that goes to pin 2 Pin 5 black I'm just wondering about pin 2 and 4 is this correct
  20. my2995dx

    Cobra 2000 gtl

    It was unplug when I did the caps I was only using the 12v to test after.It went dark after I called the radio didn't even do the freq counter yet so I did that and still dark will have to go back through it and see if i messed up
Top Bottom
Back