Search results

100 to 4100 do you need it spelled out you are a self proclaimed tech aren't you? can you use a tone generator can you use a scope can you do a sweep? would you not test a stock then a mod for yourself off of a published piece? I see a lot of flaws.. basics that you can not even comprehend...

501 is not even soldered to the board on a stock 955,, got it?

Well you best ask Stryker then as 501 is not there on a STOCK stryker it was not removed at all by anyone.. it is not there stock!! Do you even have a 955? open it and look it is Not present you have stared your useless tearing apart of a simple expansion without even having a 955 in front of...

if you cut those wires you have no receive

look at mine tr32 something added? or a different revision? or a hack? my board is different no tr32 even on top its listed underneath as in the picture

I noticed if you lower vr1 on the echo board it kills the audio as well even with echo off So it is finding a balance between the echo VR1 and the modulation pot on board. Very interesting how even with the ECHO switch off it still effects normal audio Checked r249 and r239 with ohms meter the...

_________________ TGM in on or off does not seem to make a difference on the scope wave Turning the echo knob off on the front of the radio and the AMT all the way down has no effect there is still a slight talkback coming through (kind of like the last version of the cobra 200 where we had...

NO parts missing, no traces underneath cut (they like to do that also to hide their hack work instead of removing or cutting the limiter I have seen them cut the trace on the bottom of the board) Yes I have a 100mhz scope as I stated the AM wave looks like CRAP on the scope no matter what I do...

Nothing I asked is on that site, as I stated I already did research

stryker 94 has 2 adjustments for am power and am mod allowing to set 100% modulation for both LOW AND HI POWER on the fancy O scope

Anytime, I have no issue sharing information I have But Sure I will ask questions as well :)

I have gotten a Magnum s9, THE 2030 model not much appears to be hacked inside it.. I am looking for 2 answers 1 how do I totally stop and remove the AMT 2 Where is the limiter or location of the traces to said limiter for AM I have sideband tuned perfect on the scope to 100% modulation AM...

sr955 bias check adjust

LINCOLN II

Richard Service manual

President Ronald Service Manual

that means nothing the radio should be on on transmit weather i can use a clarifier or not, I do not have to chill out when i can not get an answer to my question.. weather it has a vfo or not, it still should be transmitting on frequency without having to twist a vfo and yes i also have many...

So the answer is no you do not I will unwatch this thread

my counter is showing it low on lsb on every channel usb is fine my 8 digit counter my other 6666 reads as it should hence i just need to adjust the lsb pot if there is one. But i have no schematic or service manual hence why i asked if anyone knew the LSB tuning p o t or VR for the 6666...

Since you have no answer i will just set in the menu FIN to R and T and tune to a known station. thanks for no real answers as I was looking for.. just not much out there for documentation on the 6666 and very select few have the service manual and they won't tell anyone