• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Search results

  1. Lkaskel

    Vintage SSB Base CBs vs New

    I think the obvious answer is.....beauty is in the eye of the beholder. If you prefer a newer radio, that's great AND you are not wrong. If you prefer the older radios, that's great as well AND you are not wrong. As far as performance goes, some of the older radios still hold thier own with...
  2. Lkaskel

    Cobra 29 GTL Leaked capacitor after 2 years?

    Maybe try measuring the voltage at the cap while in RCV and XMT. That would be interesting to see. Also, if you have a scope try the same thing to see if you get a sawtooth (ripple current) reading. https://resources.pcb.cadence.com/blog/how-to-measure-power-supply-ripple-on-an-oscilloscope
  3. Lkaskel

    Stabilizing Frequency - what do you do?

    That's a great point!! I've really only checked channels 36-42.
  4. Lkaskel

    Stabilizing Frequency - what do you do?

    Hey Brandon, All 3 modes were affected. It will be interesting to see if X1 (10.240MHz) or X2 (14.55MHz) is causing this. The alignment went well so I do not believe that any of the VR's or trimmer caps are at fault but....that is a possibility.
  5. Lkaskel

    Stabilizing Frequency - what do you do?

    Here is a followup to this frequency issue/case study. Two days ago I turned the heat on in my office and have maintained a room temprature of 72 degrees. I waited 2 days to allow the radio to settle. I am unsure how necessary that is but it is a good reference. The radio is now 100Hz high...
  6. Lkaskel

    Stabilizing Frequency - what do you do?

    Hey Everyone, I guess the 1st thing to do is explain the case study. I have a 198? President Jackson export radio with the PB 042 board in it (see attached pic). I have completed a full recap. removed the glue and aligned. The only mod is an unlocked clarifier and the rest of the radio is set...
  7. Lkaskel

    Cobra 2000 butchered clarifier mod, boy do I need some help!!!

    Ok, so the radio is back in service. Thanks again Nomad for your help on this one!!! Check the attachment out for the final result.
  8. Lkaskel

    Cobra 2000 butchered clarifier mod, boy do I need some help!!!

    Thank you for this Nomad!!! I have 2 questions for you. 1) In the instructions it says to remove D32. That Diode is coming off of L22. Is that supposed to be D52? 2) In some of the mods online they call for removing D51 and sometimes jumping it out. I am unsure what that would accomplish...
  9. Lkaskel

    Cobra 2000 butchered clarifier mod, boy do I need some help!!!

    Hey Everyone, So, while I am waiting on some parts for other repairs I decided to look at a Cobra 2000 for a local op. He asked to have the extra channel mod taken out but would like the clarifier mod working. Removing the channel mod was pretty straight forward as I found a mod online that...
  10. Lkaskel

    Cobra 132XLR Frequency alignment challenge

    I'm sorry, as I was reading this I was getting a can of gas and a match :). What you explained regarding R322 "the range" of the clarifier makes so much sense to me after I spent a lot of time in the rinse/repeat mode. Let me ask you this. I I adjust L303 (the 17.0555 adjustment) to get the...
  11. Lkaskel

    Cobra 132XLR Frequency alignment challenge

    Hi Everyone, So, on the bench is a Cobra 132XLR for an alignment. The frequency alignment is a little different than most radios I have worked on. It starts with a frequency check (no adjustments. It's looking for 5.12 MHz and its reading 5.11814 MHz. You then adjust L303 for 17.055 MHz...
  12. Lkaskel

    Galaxy DX 2517 Problem

    Hello AK, I've not worked on a 2517 before but I did look it up. I am assuming that it is a dual final radio as it is listed as 10 watts AM and 25 watts SSB. That being said, if the radio is doing 14 watts AM it sounds like the tansmit portion is working although maybe not like it was. The...
  13. Lkaskel

    I need an IF tuning coil ECIFT12002

    Regarding the part for Enterprise312ok... If anyone has a Cobra parts radio models 85, 132 (non XLR) or 139 (non XLR) those radios have he same part# he needs. The part is an RF Transformer L1784. Dynascan part number 066-015-9-008
  14. Lkaskel

    I need an IF tuning coil ECIFT12002

    I just PM'd you. I was so excited, I have a Cobra CAM 89 parts radio. I was sure it would have an exact replacement for your T7 but it does not.... Darn!!
  15. Lkaskel

    I need an IF tuning coil ECIFT12002

    Hi Gang, On the bench is a Texas Ranger TR696F base with VERY poor receive. I knew I was in for a challenge as many case screws were missing. As a side note, I am using the DX 959 non-mosfet service manual for this one. I started with a basic alignment and as we all would expect the PLL...
  16. Lkaskel

    MRF477 deceased, leaves behind grieving owner of Galaxy DX66V.

    I must say, you have the best title for a tread in a long time!!!!!
  17. Lkaskel

    Tram D62 unknown VR

    Hey Everyone, I have finished a Tram D62 repair and alignment by using the Cobra 132XLR info as I cannot find anything specific to the Tram. I was able to find a few differences but there was one VR that I cannot seem to figure out what its for.
  18. Lkaskel

    CB w/amp bleads through truck speakers when the truck is running

    Thank you both for your thoughts!!! The logic challenge I have is that the talkback effect only happens when the truck radio has power (even if its turned off). The only time this does not happen is when the truck is turned off and therefor no power to the radio. I am expecting that because...
  19. Lkaskel

    CB w/amp bleads through truck speakers when the truck is running

    Hi Everyone, I had a few amps come across the desk this week and I thought I would try one in my truck as I don't run one regularly. I connected a Pride 150 up to my Tram D62 and all of that is connected to a Wilson 5000 mag mount. When running the radio with the amp on it came through the...
  20. Lkaskel

    No name amp with 2 internal adjustments. What are they for?

    Thanks Shockwave!! Is there anything I can do to be sure they are adjusted right for 10 and 11 meters? I know that is the limit of frequencies this op will be using this for. The are adjusted as they were when I opened it up.