You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Click here to find out how to win free radios from Retevis!
Well, when one thing gets fixed something else goes wrong! So now when I key up on USB with NO audio I have full output and carrier control has no affect, always full output. On LSB when I key up there is a slight amount of carrier, maybe a few watts output and when I modulate it goes to full...
Hi all, I had some time so I studied the paperwork for the mod from FoxTango and then did the mod, not too hard and I already hear an improvement but no one was on the air for the real test but I can already hear the normal background noise is much normal sounding. Thanks again! Adam
Hi all, I have a really nice FT-101E that I use for AM reception and it used to be better but now it sounds muffled on AM. I do have the AM filter installed but the sound quality is poor. Signal strength and receive is great, just sound quality is the problem. I tried external speaker but no...
Hi, if someone has the info I am looking for the S meter adjustment pot and also where to adjust the frequency (it's off by a little). Thanks for any help. Adam
Thanks, I saw that info before, I need the alignment info for frequency adjustment plus a schematic that shows where the parts are located for xmit and rcve alignment. Thanks, Adam
Hi all, I just acquired a nice Royce 1-625, can anyone give me alignment info for it? I looked around but could not find any. Thanks for any help. Adam
Hi all, I am not the best at this, can I do a simple test on the power transformer? It has 2 wires in and 2 wires out. On the 2 wires in I should get 120VAC give or take, yes? On the wires out BEFORE the bridge rectifier what should I see approx for VAC output? Thanks, Adam
Hi, so I opened up the radio and when I transmit the power transformer is buzzing, if I press on top of it to stop some of the vibration it lessens, can it still be the bridge rectifier? Thanks, Adam
Yes, thanks, I see the schematic, it has the part number so I now know exactly what it looks like. If I don't see anything that looks suspect when I open the radio (like a bad cap) I will order a bridge and replace it. Thanks! Adam
Hi all, I have a Galaxy Saturn (not turbo) and this evening when I went to transmit there is a pretty loud/buzz/hum. When I am not transmitting I can hear it a little when volume is turned down but when I transmit it's fairly loud. On AM it's loud and on SSB it's low until I modulate and gets...
Hi all, this is a real long shot if someone can help. I acquired a nice Panasonic RJ-3600 and find that channels 36 through 40 are out. I am thinking it may be in the channel selector mechanism but that is just a guess, if someone is more familiar with the radio and can help me to bring those...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.