Search results

Hi all, I acquired an RCA 14T 303 CB and the xmit is a little off frequency so I need to adjust it. Can anyone post the page from the service manual with that info or tell me what pot etc to adjust? Thanks, Adam

I guess looking at the rest of the schematic and the power plug on the radio it does show pin 7 is ground so that means pin 7 will be positive...Thanks, Adam

Hey, thank you SO much, that helps a lot. Funny it does not say for the !2VDC lines which is positive and which is negative? Anyway, thanks, Adam

Hi all, I have a Sonar G CB and need the wiring for the DC power cord, a schematic would show it, any help out there? Thanks for any help. Adam

Hi all, I have a Tram D201A that needed a little work on the channel selector, it worked about 90% but I decided to take it apart and clean it HOWEVER I made a mistake and reassembled improperly and damaged one of the little metal fingers on one of the blocks and needless to say the channel...

OK, I figured it out so all set.

Hi all, probably a simple adjustment but don't want to adjust the wrong one, on the Tram D201A in MANUAL tuning I see the VFO dial is off by approx 1 channel, in other words listening to channel 25, it shows channel 24 on the VFO dial. Any help? Thanks, Adam

Hi, I am thinking there is something wrong with the mic so for now I will leave it till I am back in the mood. Thanks to all! Adam

Hi, the Saturn must be different, that won't even key the radio but thanks for trying.. Anyone else? Adam

Hi, yes, I had that info but as mentioned I am not too bright. Hoping someone has a Galaxy Saturn and can help. Thanks for answering! Anyone else? Adam

Hi all, I used to be smarter but now not so much...I have a Galaxy Saturn and trying to wire it to a Turner M+2/U hand microphone I have, the Turner has 4 wires ( Whiet, Black, Red, Shield). I have tried various combinations but I am missing something. The mic works and I can get it to key up...

OK, probably why using pin 8 in one of the adjustments did not work. Thanks again, Adam

OK, I am of course hoping that I won't have to do the extra steps but will check when done that 8 volts is there. Thanks again, Adam

Thank you Handy Andy! Adam

Wow, FANTASTIC, you are awesome...Adam

Hi, thank you SO MUCH for the info. The only problem I have is how do I know which one I should do, I can see the components on my board to do either one! Thanks, Adam

Hi all, I am trying to unlock the clarifier in my DX-2547 but can't find any info about how to do it. The board in my DX-2547 is EPT069611A, can anyone tell me how to unlock this? Thanks, Adam

Hi, I saw this post, I have a DX-2547 and I am trying to unlock the clarifier, the board inside is EPT069611A which I think is same as DX-949. If so will the clarifer mod mentioned above work in my DX-2547? Thanks, Adam

Here is pic of IC3 in DX-2547.

Hi, thanks but I did clearly say I had the DX-2547 not a DX-2517.....I may be getting older but I can still read a part number. Thanks, Adam