Search results

Very appreciate your help, Thank You! I'll update You for results. Good Job!

Good evening, I read your very interesting post, unfortunately I have the same problem with the same radio, could you be so kind as to specifically list what operations you did on the rci 2995 model to be able to have a positive swing. Thank you, you would solve a big problem for me. Greetings...

Appreciate. Thank you!

Thank You so much. I'll You update. I'm trying to understand this radio. I'm sorry, where can I found spare parts, like variable inductance for Ranger radios?!

Thank you for the valuable suggestions, unfortunately the manual I'm using is very lacking on how to perform the alignment steps specifically. I'm also having difficulty with the noise blanker, which I can't get to the required voltage on the TP1. Is it possible to find a complete and detailed...

Good morning, during the alignment of 2995 ranger, the L37 is requested to adjust to max output, but I've had no variation. It's work on IC9, aTDA 6130. Some suggestion, please. Thank You. Federico

Hello everyone, I need to align the receiver of my RCI-2995 DXCF, can I find detailed instructions? Those found in the web do not explain the function of each variable inductance. Thank you so much! Federico

Yes,it is swings backwards. Until 20 watts it goes forward during modulation, over 20 until max at 50 watts swings backwards. Thank You.

Less 20Watts?!uhm...I think that's not the way. Thank You

Good morning at All, I'm using an new RCI-2995DXCF about an year, I noted with a good external wattmeter that over 20W output power setting, the power decreasing with modulation. The measurement is made in avg mode , if I check in pep mode this behaviour is not shown. Please, have You some...

Thank You for all suggestion.

Oh, yes! With no modulation into tuned antenna very high the needles are parallel! Into dummy load very good. But, I think that the dummy load quite the harmonics, with the antenna are reflected to the system...

I'm using only an external swr meter with crossed needles. If I check the swr in SSB the swr value skip to the stars. I'm used to compare an RCI-2995 DX CF in the same conditions with no problem. Same pcb board, same RF transistors PA type, obviously fewer in number, the 2995 is less powerful.

Dears, The dummy load is in tolerance. I'm thinking a not good tuning between the output of the final transistor and the input of amplifier section. I'm thinking that the radio section don't see a 50 ohm from input amplifier stage. I've other radios in the shack and no problem with the same...

Good morning, I bought some day ago a new RCI-2970N4 but an issue about high swr when I connected to a perfect tuned antenna, that used with other radios in the shack without problems. If I check the 2970 with dummy load is perfect with no modulation, with modulation the swr jump to high...

Hi! I'm so sorry... I'm buying an HP 8920 TEST Set to align my stuff... Yesterday evening I switched on my Ranger and.... silence... Oh merde! This morning I found a RF connector not properly soldered, with poor quality connector... I replace everything with better. Now it work again. I 'm very...

Thank You for reply, I worried about too much noisy cause no good alignment...

My mail: romagnastations@libero.it

If You send an mail or contact I share the video or recording. Thanks

Not allowed video...