You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Click here to find out how to win free radios from Retevis!
had a look under the cover and all the transistors check out ok but output from mixer woefully low and tight,...im seeing 200 mW on band d and nothing elesewhere
L40, L42 and l43 and L44 ..only getting a smidge of output on one perhaps 2 bands while rest is dead unless i specifically tune for...
I have not got as far as adjusting the coils yet as i have zilch coming out , i will desolder the cover on the mixer to test the transistors inside. Should see something on the scope and im not...
Thanks for the reply ...im looking at transmitter alignment on the cb tricks page ...but cannot even find the mythical r102 or test point 6 to begin the process....where is it??
Acccording to the cbtricks layout it should be very obvious as to where it is, on my magnum i see r101 and 103 but...
Hi Guys , im struggling with a magnum s9 , it had a catastrophic failure of the finals which took out the regulator and even the tx switching transistor, Now after replacing all the mosfets and biasing them up correctly i have a radio that is transmitting , but at a very low level nothing is...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.