Search results

Thank you

Hello. I have a Delta PSM1000W. What is the process for calibrating this meter? How do I check and see the accuracy?

Thank you sir. I will try and let you know.

Any idea what size? The antenna specs say Thank you for the information. What capacitor would you recommend that I put back to make antenna work properly?

Okay. So I used mfj antenna analyzer today and the antenna was reading 80 ohms . I changed the horizontal angle of antenna a few degrees and rechecked. I ended up moving it about 1/4 " and now the analyzer is reading 50 ohms. It also changed the 1.35 swr down to 1.2. Now channels 1 & 40 are...

Do you know what I can put back on it ?

Hello. I have a k30 magnet mount antenna. The receive went away and swr went off the chart. I took the magnet off the bottom of the mount and the coax is burnt. It looks like it had a resistor or something Sauderd across the transmit conductor and shield. Does anyone know what this is or...

Ah , good idea. Thanks. I'm not sure where to post , but I have a k30 mag antenna. All the sudden the receive disappeared and swr went off the chart. I opened the magnet and it coax is burnt. It looks like they used a resistor or something between the transmit and shield. Does anyone have...

cool. Thanks. I ordered one. When it gets here I'll check it out

Okay . So how do I tune for resonance and reflect powerof modulation. Antenna analyzer and oscilloscope?

That's a good idea. I'll try that That's what I was trying to do. I appreciate it. I'll let you know what the outcome is. I also ordered a new Nano VNA analyzer. I drove the truck today and was able to hear clearly and speak to people all over the united States.

Hello everyone. So I learned a few lessons. I purchased the large heavy duty antenna stud because it was recommended. It's trash. The stud pulls right out of the threaded housing. I installed straight heavy duty stud, it's tight. I de sodderd coax end and put new one , no changes in swr. I...

Delta psm1000

Alright . I appreciate it. The gentleman that built the connex said 1.5 was too high and he wouldn't talk on it , claiming it would ruin radio

Hello . Well I added the 20 inch shaft to the base of antenna and rechecked the swr. it's still 1.5 . The coil is above the cab. I even put a new larger heavy duty stud mount and double check grounding. I tried a top load firestick just to see what happens and match says 1.5 . I put...

I tested the swr on the antenna. It's 1.5 I will definitely add the extension when it gets here. The receive sounds good. I tried a midland field strength meter to try and check the transmit pattern but the meter didn't work for some reason .

Okay. I just installed the new Browning BR-92-BL antenna on my peterbilt truck. I had to mount it on the back of the cab on existing suport bar using a heavy duty mirror mount. I centered the antenna in the middle of the cab . I grounded the mount and antenna to the truck frame. The coil ended...

Yes sir will do. I just finished install. New browning antenna and super mini 8. I ran 4 gage fused power cables with Anderson connectors. Grounded the system. I just powered the unit on and checked swr = 1.5 receive sounds nice and clean. Don't know anyone close to here, but I will...

I tried unit on the bench with an original road king trucker noise canceling mic. Plugged into 10 amp solid state power supply. Plugged into dumyload Yes. 4 Gage wire with 30 amp protection fuse. Anderson connectors. 15,000 Browning br92 antenna grounded . Supper mini 8 . The plan is to...

I just bought a 4300-300 . When I plugged it in and started talking on low, (50) watts it was okay. As I turned the power up it started to oscilat and squeal. I was going to call the guy I bought it from but I check the mic and screwed on tight. The noise went away. I have it set keying...