Search results

YMMV==Your Mileage May Vary

Looks really good that way! Can you post a source for that flex mount?

If-en it does wind load break, this is where it will: There's a pressed in and glued brass pin that goes up inside the bottom of the vertical and high wind forces can cause the leverage of that long tube to break right there at the top of that pin. FEAR NOT! It's an easy fix. Ask me how I...

Also, just got a crazy storm here in N Texas. It still up there.

I have the SIRIO m400 starduster. It's a great antenna. I think you will be happy.

I've done lots of those kinds of things. I have heard "The only people who don't make mistakes are people who"... I used to hear, "never do anything" but even THAT is a mistake. I've learned not to get upset even when it's doozy. :( Seems like you have too. :thumsup: hopefully long before I did.

I sent my number to a seller after I had a problem with the order. Never got notified. YMMV.

that predator is so big and ugly. (I have one :( )

Just about everything I have bought from them has been suspiciously refurbished and not well. Meters broken, radios with bad solder. Only one of 5 or so orders was without issue. They also have a NO RETURN policy. My recommendation: Stay away. They also do not allow critical product reviews to...

https://www.walcottradio.com/oil-coil-high-performance-mobile-cb-radio-antenna-p-2836.html I used one of these back in the 70's and talked international. Was called "AudioKing". Now I think it's "road pro", Found one online last year at home depot of all places...

I don't think it makes a good mobile. Probably a great POTA or a SOTA box with an MFJ QRP loop or equivalent. I find the way the RIT works is cumbersome.

heard Australia on 11 meters last week. Also just about everywhere domestic yesterday all day. Interrupted a lot of local traffic :)

This is just the source for the modulation to be analyzed by the scope. You will need a scope too.

cp1. Sorry. Did not impact the talk back.

I'm sure it would. Bells CB did a 979 for me in it an it is very good.

Bells is a good shop too.

Here's another source but 8 gauge https://www.ferrulesdirect.com/products/ptnb10-12

I thought the same but my issue has come closer to the surface of my remembering. :) It started out as no xmit and became no power on with a sticky volume switch. Then Larry fixed it by replacing the volume/power switch. IIRC. I do KNOW there was nothing else done because Larry lets us watch...

These are hollow so the set screw will crush them...

https://www.3m.com/3M/en_US/company-us/all-3m-products/?N=5002385+4294888871&rt=rud Great! https://multimedia.3m.com/mws/media/807103O/3m-wire-terminals-2013-product-catalog.pdf pages 67 and 68