Search results

Old being brought back from the dead but what about a mod fopr say am only pll02a radio like the Ge. 3-5812a?

Sure did Unit 75 I've got filter 1 left and filter 2 and fet2 yet to try at this point.

Best I got

I'm going to assume this is an agc issue I have to have the volume full boar to hear any normal static i can hear my locals blasting me out of the chair when they key up. When the other stations I talk to 20 miles out key up I can hardly tell some one had recapped the radio with junk Chinese...

Really I was under the assumption that the noise filter was some kinda hi cut and that with a narrower filter it would pick up less hash and trash as well as bleed over.

I see if you look on his site he offers a mod for A "ranger noise" filter and also that he is putting on narrower 7.8 mhz crystal filter I assume the stock is 15khz wide he is going to 10 I've see it on the anytone as well I'd like to know what the mod is. I live in a very loud city lots of...

Anyone have copy of unit_399's web page it was like 20 some pages of awesome info on the 858 chassis radios the site is gone

Old old post I see but I have one of these that will do 100 watts till you talk on it about 30 seconds then it warms up and get 300 ish out weak tube maybe? The filter caps have been changed also the 1000uf by on the back of the rear final tube.

Getting back on topic and old one I know I'm curious if anyone has made and crystal filter changes to these to clean up the rx on them same with the 98vhp I've owned both now nothing but noise boxes in the truck with 102 inch whip.

Well thanks again for a great explanation nomad as I've come to expect from you and our days at CB tricks speaking if that did they bring the forum back up yet? And on the radio mostly wanted to use the counter to quickly navigate the extras we use am mostly here. 26.05.50 to 28.04.50 is a lot...

Old post I know any know how to hook up a galaxy counter to one of these for use with the extra channels the points all the wires get soldered too in this case I know thare are instructions around for the newer 148 and Washington but haven't seen any for this or older 858 based Washington

Its actually in quite good shape just dusty from not getting used much is all.

Will be happy to post one of it powered up working as well.

Hope it worked

$150 plus PayPal fees which is about 4 bucks and shipping con us 10 bucks tops

I have one of these for sale currently if anyone is looking PayPal only

Sonoma the bb2 has a loose yellow wire next to the power wired for the board as well as a loose red wire on the potentiometer for echo control maybe it's used to break power to the board not sure but it's not the same as the l2n you posted I had some of those to they are easy to hook up

Still have them could you pm them to me?

I actually need instructions for the bb-2 can some one help?