You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Click here to find out how to win free radios from Retevis!
Hi what would you say for a brand new A-99 that is on a 40' pole unfortunately not real far away from a steel roofed and sided outbuilding but the antenna is way above it, the only way I can achieve a great SWR is to have the tuning rings all the way to the top, then the needle hardly even...
You were absolutely correct as it is now fixed that schematic earlier that had the cap and resistor backwards fooled me and I got the base and emitter backwards , I looked and looked
Hi, I don't know if I discovered anything big or not but these components look as if they are installed backwards, schematic show from the base terminal of that transistor a resistor next, then the capacitor but what I actually have is the transistor, a capacitor, then a resistor! Does this...
Absolutely does sound good and I have Absolutely no problem paying for it ! If anything I owe DX a donation, you guys are great. I will send you my info however I am still going to be working on this thing in the meantime as I really just want to know and find what the problem is with it just...
It seemed to me once i turned the switch to low or high the relay would kick in and just about every wire going into the relay circuit board had power in it I want to check the one coming from the SSB again because it should not have power with the switch in Am position I sure wouldn't think...
Good deal ! I would have too as there are not many techs around here anymore and I do enjoy working on and learning my own stuff but I always need help from guys like you I could have done even a slight portion of the electronics I have done without assistance from others online because my...
Not only that I am always use to boards that actually have address on them, these boards have nothing so I hold the boards over a light bulb to be able to see where the actual traces even are ♂️ and the schematic had me confused as I didnt know this board was broken up into sections as I had my...
Thank you, I absolutely see everything you stated and you stated it perfectly, the previous owner had obviously turned that resistor down to the output SO-239, was it soldered on, I don't know as when I first removed the board I thought I broke it off the connector, I see the schematic fine now...
I see it I just dont understand why they broke up the schematic of the actual relay circuit board where it is in two different places and trying to view it on a phone is not the easiest as I should have printed it out, the purple wire out goes to the meter and it looks as if the resistor is...
I am trying to understand this as it looks like it would connect to the coax coming from the plate and load controls where it connects to the relays circuit ? But that other little schematic that has D9 on it has me confused, so this is on the bottom of the amp probably around where I replaced...
Sorry man, I am not the best at schematics and I was focused on the other part of schematic on the relay board, I am pretty much lost now and not sure what to test now
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.