Search results

I haven't had any complaints from the locals on splashing over channels but then again I live in the middle of nowhere so there aren't too many talking locally anyhow. That little bit of extra obnoxious loudness goes a long way on blasting through the mayhem when talking DX...even if it's...

Low Boy this is what it looks like on my cheapie scope. Not great but not too dirty. That's a 400hz and a 1k signal outputting around 35 watts peak on a Palstar and around 120% mod on my Boonton meter. So take that with a grain of salt considering the measurement equipment, plus I'm not very...

Not at all friend...time well taken. Great info for sure. Much thanks.

Wow there certainly is more to this Mosfet mod than I first thought. Thank you for explaining this all to me. I bought this 29 used and full of mods that I didn't understand and you have definitely helped shed some light on them for me. I just found the the way the Mosfet mod was done was much...

So that explains why I seem to have to keep my delta tune all the way to the left for clear recieve. I think I will eliminate that mod as it seems like more of a nuisance than a benefit. The companion part was heat shrunk and gently folded flat so it does not short on the cover. I just exposed...

Hi Andy, thanks for hopping in here. Here are the pics from the mods in question. The first two show the two spots where resistors where put in series for d11 and d17. It's an 8.2k resistor on d17 and a 1k resistor on d11. The next two photos are showing a couple of other things that I noticed...

Lol..yes definitely hacked. They removed l14 and l16 slug. Mosfet swing kit, yaddah yaddah. I've seen those mods done before. However the mod limiter, d11 is not clipped but instead a it was lifted from the board and a resistor was put in series. The same was done for the d17 delta tune diode...

Hi all, I know it's been awhile since anybody added to this thread but I was wondering since we are talking about mystery mods I would ask this question. I have a 29 ltd classic which was definitely hacked a bit before I found it. There is a resistor added in series with d17, which I believe is...

Hi all, So I've been looking for an affordable sinad meter for awhile now and found this one on flea bay. I've been trying to locate documentation for it online but have searched everywhere to no avail. I'm mostly interested in it's calibration procedure. It appears similar to the Sinadder and...

So just a quick update if anyone is interested. Went to good ol Home Depot and had them color match the mic and used outdoor high gloss enamel. Not too bad of a match to tell the truth. Did what I wanted...not perfect but doesn't stand out as bad for sure. Thanks for all the ideas everybody. On...

I see that Rustoleum had a hammered finish light blue that looks close. I don't think I can perfectly match the original color but if I completely strip all the existing paint of and start fresh with it then it may look pretty good. It's too bad cuz it's only a couple of chips.

Thanks Tallman!! Those are both great ideas which I never even thought to try. I will be on my way to town tomorrow with mic in hand. Folks at Home Depot may give may look at me strange but I'm used to that anyways haha...73

Hi all, I don't know whether or not this topic is worthy of it's own thread but I couldn't find one to build on so here it is... I'm trying to restore an old Turner+2 SSB Transistorized desk mic and can't seem to find a good touch up paint for the blue color on the mic. Has anybody ever found a...

Just an fyi. There's a reputable Ebay seller who's selling out his stock of Korbitone elements if one is wanted. I recently purchased one and popped it into my Silver Eagle and love it. He's also considering selling a kit with the Korbitone w/FET mod attached. I trialed this for him and it has...

I thought that it was strange how the black and red are different than the norm initially myself. I did verify that the mic was correctly wired for electronic switching and it was. Did not check the transistors but checked all the caps and it's definitely the original ceramic...

I did treat the switch with Deoxit Gold even though it appears that this mic was used maybe once just to test it out when it was first purchased back in the day. It literally looks new (except for the horrific battery leak). The contacts were mint but I hit them with it anyway. Magnum, where...

I'm running it on a Galaxy DX2517. Wired 1-shield, 2-white, 3-black and 4-red.

Thanks Leo, I'm using Duracell 357s bought locally so they are fresh and strong. Trying to avoid sending it out for repair but it looks like I'm heading in that direction . 73

Yes I did the same thing. Five 357 watch batteries stacked is what I'm using. The batteries are rated at1.5V reach but I'm getting exactly 8V when assembled. I did find the original 7V battery for sale online but it hasn't come in the mail yet. Maybe it's my homemade battery?

Hi everyone. I am trying to revive an old Turner JM+2/U and am getting very little modulation out of it. This mic was hardly used and appears to be in excellant shape but there's something not right. I've checked and have good grounding to foil throughout and up to the switch and I am getting 7v...