You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

ok i just want to clarify something else because it would lead in two different directions.

can you meter from PC board ground (any tuning can) and the chassis of the radio?
do this with both the power on, and the power off on the radio.

I want to know if you have a DC connection from PC board ground to the chassis.

if not, and pin 5 of the mic socket shows shorted to the chassis with both the squelch pot and the mic jack not physically connected to it, we may have different issue.

right now im confused right along with you.
LC

[QUOTE="loosecannon, post: 666884, member: 1368"] ok i just want to clarify something else because it would lead in two different directions. can you meter from PC board ground (any tuning can) and the chassis of the radio? do this with both the power on, and the power off on the radio. I want to know if you have a DC connection from PC board ground to the chassis. if not, and pin 5 of the mic socket shows shorted to the chassis with both the squelch pot and the mic jack not physically connected to it, we may have different issue. right now im confused right along with you. LC [/QUOTE]

Top Bottom