You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Mic socket PC board looks good.
No continuity between board ground and chassis ground with power on or off.
pin 5 has continuity with board ground not chassis ground.
3 back tabs on squelch/pa have continuity with chassis ground. working radio does not. the white, red and green wires that go to those tabs go to the correct spots in the board.these are the 3 solder tabs closest to the front of the radio.
I have to take the pot out of the radio again and look at it possibly it is bent and touching the chassis. Although it has been out many times I probably would have noticed it.
Thanks

[QUOTE="Low_Boy, post: 666899, member: 12157"] Mic socket PC board looks good. No continuity between board ground and chassis ground with power on or off. pin 5 has continuity with board ground not chassis ground. 3 back tabs on squelch/pa have continuity with chassis ground. working radio does not. the white, red and green wires that go to those tabs go to the correct spots in th[IMG]https://www.wearecb.com/images/watermarked/1/thumbnails/220/220/detailed/16/BRVG0321001.jpg[/IMG]e board.these are the 3 solder tabs closest to the front of the radio. I have to take the pot out of the radio again and look at it possibly it is bent and touching the chassis. Although it has been out many times I probably would have noticed it. Thanks [/QUOTE]

Top Bottom