You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Okay I pulled the real pin 6 and 8 from the board. Pain-8 showing 8 volts.pin 6 showing nothing then I key the mic pin 8 still shows 8volts pin 6 still showing nothing. I then tried another regulator same problem. I then tested for continuity between the pulled pins and the trace they came off of and saw nothing. Then tested from tab to ground on each. And pin to ground on each and saw nothing.

[QUOTE="Low_Boy, post: 667361, member: 12157"] Okay I pulled the real pin 6 and 8 from the board. Pain-8 showing 8 volts.pin 6 showing nothing then I key the mic pin 8 still shows 8volts pin 6 still showing nothing. I then tried another regulator same problem. I then tested for continuity between the pulled pins and the trace they came off of and saw nothing. Then tested from tab to ground on each. And pin to ground on each and saw nothing. [/QUOTE]

Top Bottom