You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Quoted from the link you gave:

" . . . Make sure the bare wire used for the loop is hanging in free air and insulted from everything except the string it is hanging on . . . "

Needs to be parallel to the ground and suspended away from objects - especially. Otherwise, nearby objects will subject it to capacitance and then cause it to become detuned from the target frequency/band.

Not saying it won't work. I'm saying that you must stick to the design principles that will allow it to work for you as you would expect. Go for it . . .

[QUOTE="Robb, post: 242563, member: 8446"] Quoted from the link you gave: [B][I]" . . . Make sure the bare wire used for the loop is hanging in free air and insulted from everything except the string it is hanging on . . . "[/I][/B] Needs to be parallel to the ground and suspended away from objects - especially. Otherwise, nearby objects will subject it to capacitance and then cause it to become detuned from the target frequency/band. Not saying it won't work. I'm saying that you must stick to the design principles that will allow it to work for you as you would expect. Go for it . . . [/QUOTE]

Top Bottom