You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I removed R143 and replaced it with a 5.1k ohm.

I now have slide from 27.2012 at the lowest position up to 27.2088 on the highest position. That's 3.8k of slide on both sides, and the clarifier is still centered at 12 o'clock for being on frequency.

I tried shorting out R143 with a jumper. The lowest would go to 27.2000 all the way down on the clarifier and the highest would go up to 27.2098 at the 3 o'clock position then it would drop off with nothing from the 3 o'clock position to all the way up.

I then decided to just replace the resistor with a lower value and it turned out great. I think 7.6k of total slide is plenty.

[QUOTE="Hawkeye351, post: 840692, member: 61115"] I removed R143 and replaced it with a 5.1k ohm. I now have slide from 27.2012 at the lowest position up to 27.2088 on the highest position. That's 3.8k of slide on both sides, and the clarifier is still centered at 12 o'clock for being on frequency. I tried shorting out R143 with a jumper. The lowest would go to 27.2000 all the way down on the clarifier and the highest would go up to 27.2098 at the 3 o'clock position then it would drop off with nothing from the 3 o'clock position to all the way up. I then decided to just replace the resistor with a lower value and it turned out great. I think 7.6k of total slide is plenty. [/QUOTE]

Top Bottom