You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Your entire post is interesting. I am still working on the antenna in terms of thinking on potential finer finishes to it. So thanks for the info.
This part:

I've done, except the RF choke is in the 58ohm feedline. Am I correct in hearing you say to move from the feedline to the transformer section?

Also, I believe the guy wires are influencing the radiation pattern. I will be replacing the antenna end of the guys with non-resonant rope.

The antenna can only be tuned by lowering it. The fine tuning process you described is not possible at the working height. I'll have to figure that out.

[QUOTE="HomerBB, post: 144212, member: 8569"] Your entire post is interesting. I am still working on the antenna in terms of thinking on potential finer finishes to it. So thanks for the info. This part: I've done, except the RF choke is in the 58ohm feedline. Am I correct in hearing you say to move from the feedline to the transformer section? Also, I believe the guy wires are influencing the radiation pattern. I will be replacing the antenna end of the guys with non-resonant rope. The antenna can only be tuned by lowering it. The fine tuning process you described is not possible at the working height. I'll have to figure that out. [/QUOTE]

Top Bottom