You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I think you meant L17; not TP17.
TP3 is one place to start and it is at L65; use a freq counter.
Ranger RCI-2950 Service Manual
http://www.cbtricks.com/radios/rci/rci_2950/rci2950_adj_pll.htm
Then test D45 on TX for output. That will tell you if the VCO/PLL is getting the signal out to the TX mixer IC.

[QUOTE="Robb, post: 399981, member: 8446"] I think you meant L17; not TP17. TP3 is one place to start and it is at L65; use a freq counter. [url=http://www.cbtricks.com/radios/rci/rci_2950/rci2950_adj_pll.htm]Ranger RCI-2950 Service Manual[/url] [url]http://www.cbtricks.com/radios/rci/rci_2950/rci2950_adj_pll.htm[/url] Then test D45 on TX for output. That will tell you if the VCO/PLL is getting the signal out to the TX mixer IC. [/QUOTE]

Top Bottom