You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Alright, a recheck and here's what we got :

Pin 1 is the same, Pin 2 is the same and Pin 3 is the same. But the schematic shows there's no connection so I guess those 3 don't mean jack.

Pin 4 is the same. Pin 5 is now .13v, Pin 6 is now .13v, Pin 7 is now .26v and Pin 8 is the same.

Pin 9 is now 2.32v, Pin 10 is 1.45v with no SQ, Pin 11 is the same, Pin 12 is now .29v, Pin 13 is now .29v and Pin 14 is now .62v

I believe that was the issue. A few are slightly off from the chart posted at CB Tricks but for the most part, it seems to be correct now. Maybe the few that's still off will come in line once an alignment is done correctly. I've got to build an 8 ohm load though cause using the speaker for my load and reading the SINAD in the monitor... that damn tone gets to be annoying. But it'll do for now, I guess.

<blockquote data-quote="TheRealPorkchop" data-source="post: 644086" data-attributes="member: 45434">Alright, a recheck and here&#039;s what we got :Pin 1 is the same, Pin 2 is the same and Pin 3 is the same. But the schematic shows there&#039;s no connection so I guess those 3 don&#039;t mean jack.Pin 4 is the same. Pin 5 is now .13v, Pin 6 is now .13v, Pin 7 is now .26v and Pin 8 is the same.Pin 9 is now 2.32v, Pin 10 is 1.45v with no SQ, Pin 11 is the same, Pin 12 is now .29v, Pin 13 is now .29v and Pin 14 is&nbsp; now .62vI believe that was the issue. A few are slightly off from the chart posted at CB Tricks but for the most part, it seems to be correct now.&nbsp; Maybe the few that&#039;s still off will come in line once an alignment is done correctly. I&#039;ve got to build an 8 ohm load though cause using the speaker for my load and reading the SINAD in the monitor... that damn tone gets to be annoying.&nbsp; But it&#039;ll do for now, I guess.</blockquote>

[QUOTE="TheRealPorkchop, post: 644086, member: 45434"] Alright, a recheck and here's what we got : Pin 1 is the same, Pin 2 is the same and Pin 3 is the same. But the schematic shows there's no connection so I guess those 3 don't mean jack. Pin 4 is the same. Pin 5 is now .13v, Pin 6 is now .13v, Pin 7 is now .26v and Pin 8 is the same. Pin 9 is now 2.32v, Pin 10 is 1.45v with no SQ, Pin 11 is the same, Pin 12 is now .29v, Pin 13 is now .29v and Pin 14 is now .62v I believe that was the issue. A few are slightly off from the chart posted at CB Tricks but for the most part, it seems to be correct now. Maybe the few that's still off will come in line once an alignment is done correctly. I've got to build an 8 ohm load though cause using the speaker for my load and reading the SINAD in the monitor... that damn tone gets to be annoying. But it'll do for now, I guess. [/QUOTE]

Top Bottom