You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

No problem Stella.

If one doe snot know what to look for on CMC besides the obvious, TVI, RFI, PC speakers etc etc then it will go un-noticed.

The First issue I was able to say definitely that a 1:1 current balun workd to solve CMC was on a 40 meter ground mounted phased array,.

I was trying/learning about the Christman method of forced current phasing and one antenna was not playing right.

After a few days of scratching my head I decided to put a 1:1 current balun at the feed point of the one vertical, Finally the array started acting like it was supposed to.

It was a fun learning experience and made a believer out of me when it comes to chokes and baluns

[QUOTE="wavrider, post: 526486, member: 9893"] No problem Stella. If one doe snot know what to look for on CMC besides the obvious, TVI, RFI, PC speakers etc etc then it will go un-noticed. The First issue I was able to say definitely that a 1:1 current balun workd to solve CMC was on a 40 meter ground mounted phased array,. I was trying/learning about the Christman method of forced current phasing and one antenna was not playing right. After a few days of scratching my head I decided to put a 1:1 current balun at the feed point of the one vertical, Finally the array started acting like it was supposed to. It was a fun learning experience and made a believer out of me when it comes to chokes and baluns [/QUOTE]

Top Bottom