-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!
AB-1 ????
- Thread starter Switch Kit
- Start date
no I cant Jeff , but I thought I remembered them not being AB1 , this one here looks like the old boomer boxes.
I can understand the SSB delay but call it AB1 right on the front of the box and not be, is truly ballzie. :angry: IM sure it would do 400 with 4 x 1446s , but AB1 ? that's whole a different story. Good to see you around Jeff , it's been a while.
I can understand the SSB delay but call it AB1 right on the front of the box and not be, is truly ballzie. :angry: IM sure it would do 400 with 4 x 1446s , but AB1 ? that's whole a different story. Good to see you around Jeff , it's been a while.
switch they do usually have the parts in there for a very crude AB biasing circuit but the ones i have seen are grounded into class c with chokes, i put one back into AB for a local, it sounded better on ssb, not good but better, it did not improve the shitstorm of noise across the band that it produced, the one i had usesd srf7000's.
I can understand the SSB delay but call it AB1 right on the front of the box and not be, is truly ballzie.
You want "ballzie"? Look at the claims of some antenna manufacturers. :thumbdown:
I heard that it was a guy named "Vern" who builds boxes with a bias circuit, but then grounds it out through the chokes, thus making it class C. Seems pretty strange to me.
- No one is chatting at the moment.
-
-
-
@ Geoexplorer69:Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
-
-
