again ft1200dx and scu-17

[ahasverus]

dear members of the ham knighthood ,
i thank everyone who tried to help me but until now i have no result
Is there anyone using the ft1200 and a scu-17 who has been able to receive and
TRANSMIT psk31 and using the software ??????
I followed the instructions of the manual , installed before the right virtual drivers , com 11 , com12,
right soundcard ,using the mdin6p cable ,
I tried out a lot of software and the configuration
Receiving psk is not a problem
but the tx refuse to transmit
Is there perhaps an other solution using the jacks audio / ptt/ fsk on the scu
ex.
using audio In/out and Phone output tx : receiving psk is working

can hooking the jack ptt/fsk with the right pins on the mic input tx (gnd/fsk/ptt ) give a solution
thank you for your time and attention
73 on3bm on qrz.com

 

[2RT307]

Try looking here:
http://www.dxlabsuite.com/dxlabwiki/YaesuSCU-17

They have detailed settings on making this work.

73,
Brett

 

[DainBramage]

have you tried any other type soundcard software, SSTV, RTTY, ect?

is the 1200 shifting from RX to XMIT or not?

if it is, then it is just an AUDIO IN issue, you could have the incorrect LINE OUT/MIC OUT selected .
if not, then it is a TX CONTROL issue