You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

TX? You need the AF-Generator (It's still a signal but RF versus AF - Audio side) side to INPUT in to the Audio - Mic side.

Hence the need for a AF generator - or "Two tone"

[USER=41055]@kaos513[/USER] - are you using your new (to you) generator on this?

Back to [USER=8446]@Robb[/USER] - and I 2nd it, - anyone using RF generator - remember to disconnect the Bias Lines to your Driver and Final if possible - Mirror board or jumper - Many Galaxy and RCI's no longer use these techniques - you will blow up the Generator - so even though the Dummy load SHOULD be there and YOU may have remember to disconnect the lines - it still poses a Hazard to the Radio and Generator alike if you try to key up for a "Quik-look at the scopes output - POOF in one part of the line or the entire chain...

[QUOTE="Handy Andy, post: 724587, member: 52309"] TX? You need the AF-Generator (It's still a signal but RF versus AF - Audio side) side to INPUT in to the Audio - Mic side. Hence the need for a AF generator - or "Two tone" [USER=41055]@kaos513[/USER] - are you using your new (to you) generator on this? Back to [USER=8446]@Robb[/USER] - and I 2nd it, - anyone using RF generator - remember to disconnect the Bias Lines to your Driver and Final if possible - Mirror board or jumper - Many Galaxy and RCI's no longer use these techniques - you will blow up the Generator - so even though the Dummy load SHOULD be there and YOU may have remember to disconnect the lines - it still poses a Hazard to the Radio and Generator alike if you try to key up for a "Quik-look at the scopes output - POOF in one part of the line or the entire chain... [/QUOTE]

Top Bottom