You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Bun no matter how much I adjust RT301 I can not get the voltage on D302 below 23 volts and that is with RT301 all the way one way. And any where else 24V.

EDIT EDIT>> I am hoping I caught this in time. I looked at the schematic again RT301 Will adjust base voltage of R302. By my schematic the ideal voltage is 15V. I am not sure what will get the voltage on D302 down.

I also mentioned in the last post all 3 legs of RT301 were showing continuity to D302 but I must have been wrong and possibly a cap was charging. I am not getting that now. I think my new problem is getting voltage on D302 down and possibly things will work correctly. OK D302 is a voltage regulator that should bring 24V down to 16 but for some reason is not working? But without D302 in circuit the power supply works?
Sorry for rambling.

[QUOTE="Low_Boy, post: 789512, member: 12157"] Bun no matter how much I adjust RT301 I can not get the voltage on D302 below 23 volts and that is with RT301 all the way one way. And any where else 24V. EDIT EDIT>> I am hoping I caught this in time. I looked at the schematic again RT301 Will adjust base voltage of R302. By my schematic the ideal voltage is 15V. I am not sure what will get the voltage on D302 down. I also mentioned in the last post all 3 legs of RT301 were showing continuity to D302 but I must have been wrong and possibly a cap was charging. I am not getting that now. I think my new problem is getting voltage on D302 down and possibly things will work correctly. OK D302 is a voltage regulator that should bring 24V down to 16 but for some reason is not working? But without D302 in circuit the power supply works? Sorry for rambling. [/QUOTE]

Top Bottom